579168
34
Zoom out
Zoom in
Previous page
1/36
Next page
34
Remove Sear Station
Burner
To remove the Sear Station
burner, pull the burner tube toward you. This removes it
from the burner tube notch (11). Then rotate the tube clockwise (12), so that the screw
at the end of the tube (13) fits through the notch in the heat shield opening (14). When
the burner tube is free, remove it from the cookbox (15).
Reinstall Manifold
A) To reinstall the manifold assembly, reverse steps for “Remove Burner Tubes” as
previously described.
m CAUTION: The burner openings (16) must be positioned
properly over the valve orifices (17). Make sure the opposite
end of the burner tubes (18) properly align into the slots on
the backside of the cookbox. Check proper assembly before
fastening manifold in place.
m WARNING: You should check for gas leaks every time you
disconnect and reconnect a gas fitting. Refer to CHECKING FOR
GAS LEAKS.
B) Replace cookbox components (not pictured).
Reinstall Control Panel
A) To reinstall the control panel assembly, reverse steps for “Remove Control Panel
as previously described.
B) Verify proper wire connections. Refer to “LIGHT FEATURES”.
m WARNING: Make sure that all parts are assembled and
hardware is fully tightened before operating the grill. Your
actions, if you fail to follow this product warning, may cause
a fire, an explosion, or structural failure resulting in serious
personal injury or death as well as damage to property.
3
1
1
2
2
Side Burner Grate
Side Burner Cap
Side Burner Ring & Head
Igniter Electrode
Control Knob
Igniter
SIDE BURNER MAINTENANCE
m WARNING: All gas controls and supply valves should be in the
OFF position.
Make sure black wire is connected between the igniter and electrode.
Make sure white wire is connected between the igniter and earthing clip.
Spark should be a white/blue colour, not yellow.
A) Igniter wire (1)
B) Earth wire (2)
C) Burner (3)
4
3
1 2
5
11
12
13
14
15
1
2
17
16
3
18
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Weber Summit E-670 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Weber Summit E-670 in the language / languages: English as an attachment in your email.

The manual is 5,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Weber Summit E-670

Weber Summit E-670 User Manual - German - 36 pages

Weber Summit E-670 Installation Guide - German, Dutch - 4 pages

Weber Summit E-670 User Manual - Dutch - 36 pages

Weber Summit E-670 User Manual - French - 36 pages

Weber Summit E-670 Installation Guide - French, Italian, Portuguese, Spanish - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info