634248
3
Zoom out
Zoom in
Previous page
1/4
Next page
Switch on
General
Switch off
Operation
Error code
Set time/date
View time
Program
Start time
View/Delete
selected
times
Program
operating
time
Set remaining
time
Remote control
Vehicles with
ADR
equipment
Manual: Press the button (permanent heating mode)
Automatic: By programming the start time
The combination timer allows the heater start time to be selected for
a period of up to seven days. Three cut-in times can be programmed,
although only one of them may be activated.
The combination timer has a temperature setpoint generator.
When the ignition is switched on the timer shows the current time
and the day. If the heater is operating the display and the buttons
are lit.
When the timer is connected to the power supply all the symbols in
the display will flash. The time and day must be set. The display
remains blank in ADR vehicles.
The operation of the timer is designed such that all the flashing
symbols can be adjusted using the and buttons. If no button is
pressed for five seconds the displayed time is saved. If the and
are pressed for longer than two seconds, they will switch to high
speed adjustment.
If the ignition is switched off whilst the heater is in permanent heating
mode, a remaining operating time of 15 minutes will appear on the
display and the heater will continue to operate.
On heaters that output an error code (Air Top 2000 S),
a number, the error code, may appear in the display. In this case you
should visit a Webasto service outlet.
Manual: Press the button again
Automatic: By programming the operating period
When the heater is operating: By setting the remaining time
Press the button for more than two seconds the time will flash
set the time using the and buttons the day will flash set the
day.
--
--
Ignition off: Press button.
Press button program number will flash set the start time using
the and buttons the day will flash set the day.
If you press the button several times you can set program
numbers 2 and 3 or go to time mode.
--
--
Press the button several times until the required program number
is displayed.
To delete the selected time press the button until the time is
displayed with no program numbers.
-
The heater must be switched off. Press the button for three
seconds the operating duration will flash set the required operating
duration using the and buttons (10 to 120 minutes).
--
Set the required remaining time (1 to 120 minutes) using the
and buttons. The remaining time is the time that the heater will
continue to operate. It can only be changed whilst the heater is
operating and the ignition is off.
Possible using an external optional immediate heat button.
It is not possible to set a time on ADR vehicles. The remaining time
will be shown on the display whilst the heater is operating. The time
can be adjusted.
Combination timer
2
MO
Combination
timer
Indicator
Temperature
selector
Forward
Immediate
heat
Return
Program selector
Time
Program number
Day
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Webasto AIRTOP 2000 -S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Webasto AIRTOP 2000 -S in the language / languages: English as an attachment in your email.

The manual is 0.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Webasto AIRTOP 2000 -S

Webasto AIRTOP 2000 -S User Manual - German - 4 pages

Webasto AIRTOP 2000 -S User Manual - Dutch - 25 pages

Webasto AIRTOP 2000 -S User Manual - French - 4 pages

Webasto AIRTOP 2000 -S User Manual - Italian - 4 pages

Webasto AIRTOP 2000 -S User Manual - Spanish - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info