805548
1
Zoom out
Zoom in
Previous page
1/3
Next page
MILUX2 230V
General safety information
The instructions described in this manual must be observed. Failure to comply with
theses instructions will result in material damages, injury or fatal accidents.
This product must be used exclusively to regulate heating installations.
Other use is not compliant
Contents
1. Product characteristics
2. Display
3. Keypad
4. First use
5. Standby switch
6. Operating modes
6.1. TIME SETTING menu
6.2. COMFORT Mode
6.3. REDUCED Mode
6.4. AUTOMATIC Mode
6.5. PROGRAM Menu
6.6. ANTIFREEZE Mode
7. Special functions
7.1. HOLIDAY function
7.2. Keypad lock
7.3. Cooling function
7.4. RESET function
8. ITCS function (optional)
9. Technical characteristics
10. Problems and solutions
11. Recycling
12. Annexes
1. Product characteristics
Weekly programmation by 1 hour step
9 built-in programs
4 user programs
Program graphic display
Room temperature and time display.
Comfort / Reduced / Anti-freeze temperatures.
Temporary temperature override
Automatic or Manual operation
Holiday function
Keypad lock function (child safety)
« O / I » switch for standby mode
Intelligent Temperature Control System function (optional): ITCS
2. Display
[1] : Operating mode menu
[2] : Temporary temperature override
[3] : Heating indicator
[4] : Room temperature or set temperature
[5] : Cooling indicator
[6] : if displayed, [4] indicates the ambient temperature
[7] : Holiday function activated
[8] : Current day graphic program
[9] : Hour
[10] : Day of the week (only available on weekly version)
3. Keypad
Validation key (OK)
Plus key (+)
Minus key (-)
Left navigation key (◄ )
Right navigation key (►)
4. First use
Supply power to the thermostat
Put the switch on « I » position (see chapter 5- stanby switch))
Adjust the date and the hour (see chapter 6.1 TIME SETTING menu)
The thermostat is ready for operation. The default operating mode is the
automatic mode
with the factory program P1”,(see the detailed program
P1 in the annexes).
You can customize your program as you want. To do so, refer to chapter 6.5
PROGRAM Menu.
5. Standby switch
This switch is located under the product as shown below:
To put the product in standby, put the switch on « O » position. The screen
switches off to reduce consumption. The keys (+), (-), (◄) and (►) become
inactive. A press on (OK) key allows displaying briefly the ambient temperature
and the hour, together with the pictogram:
To activate the product, put the switch on « I » position. During 3 seconds, the
software version will be displayed. Then, the thermostat comes back in the
selected operating mode before the standby.
WARNING: In this standby mode, your installation can freeze.
6. Operating modes
Use the navigation keys (◄) or (►) to change the operating mode.
6.1. TIME SETTING menu :
Press (OK) to enter in the menu. The minute display is flashing.
Set minute value with (+) and (-) keys
Press (OK) key to validate.
Set hour value with (+) and (-) keys
Press (OK) key to validate.
( (►) key allows to return to the minute setting)
Weekly version
Set day value with (+) and (-) keys
(1=monday, 2=tuesday, …)
Press (OK) key to validate
6.2. COMFORT Mode :
In this mode, thermostat applies comfort setpoint temperature indefinitely. By
pressing (+) or (-) keys, setpoint temperature flashes and can be adjusted:
The ambient temperature
is displayed after few seconds:
A press on (OK) key allows the displaying of comfort setpoint temperature.
To apply temporarily comfort mode, use the special function « HOLIDAY ».
6.3. REDUCED Mode :
In this mode, the thermostat applies reduced setpoint temperature indefinitely
By pressing (+) or (-) keys, setpoint temperature flashes and can be adjusted like
the COMFORT temperature. The ambient temperature
is displayed after few
seconds. A press on (OK) keys allows the displaying of reduced setpoint
temperature.
To apply temporarily reduced mode, use the special function « HOLIDAY ».
6.4. AUTOMATIC Mode :
The thermostat follows the chosen program (see chapter 6.5 for the program
selection / edition) with respect to current hour.
By pressing (+) and (-), an overriden temperature can be adjusted until the next
program step:
The pictogram is displayed.
At the next program change, the pictogram will disappear and the program will
carry on.
6.5. PROGRAM Menu:
Press (+) or (-) keys to choose a program number:
= Comfort setpoint temperature set in the COMFORT mode
= Reduced setpoint temperature set in the REDUCED mode
If you select a built-in program « P1 to P9 », press (OK) key to apply this
program in the automatic mode .
A light weekly programs description is given below:
Number
Description
P1
Morning, Evening & Week-end
P2
Morning, Midi, Evening & Week-end
P3
Day & Week-end
P4
Evening & Week-end
P5
Morning, Evening (bathroom)
P6
Morning, Afternoon & Week-end
P7
7h - 19h (Office)
P8
8h - 19h, Saturday (Shop)
P9
Week-end (Secondary House)
A detailed programs description is given in annexes.
If you select a user program « U1 à U4 », press (OK) key to enter in edition
mode :
With navigation keys (◄) and (►), move the blinking cursor on the hour of the day
that you want to modify.
When the day seems to be correctly edited, press (OK) key.
Daily version: the day’s program is validated for every day of the week.
Weekly version: you switch to the next day edition. By validating the day 7, you
validate the program edition. This program will be followed by your thermostat in
automatic mode (see chapter 6.4).
6.6. ANTIFREEZE Mode :
In this mode, the thermostat applies antifreeze setpoint temperature indefinitely. By
pressing (+) or (-) keys, setpoint temperature flashes and can be adjusted like the
COMFORT temperature. The ambient temperature
is displayed after few
seconds. A press on (OK) keys allows the displaying of the antifreeze setpoint
temperature.
To apply temporarily the antifreeze mode, use the special function « HOLIDAY ».
GB
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Watts MILUX 2 230V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Watts MILUX 2 230V in the language / languages: English as an attachment in your email.

The manual is 0.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info