805482

Watts BT-M6Z02 - Radio Connection Box Manual

3
Zoom out
Zoom in
Previous page
1/60
Next page
3
3 User interface
3.A. LED color meanings
On BT-M6Z02-RFthere are one bicolor Led per zone (1) to (6) and 2 additional status Leds.
In normal working mode:
- (1) To (6):
o Red fix: Heating or Cooling demand indicator (Water circulation on this zone)
o Green flash: RF signal received from the thermostat assigned to this zone
o Red blinking: RF alarm, the communication between thermostat and the BT-M6Z02-RF has been lost
(in this case check batteries on this thermostat)
o Red blinking on all zones: check the RF antenna connection
- (7): Pump indicator
o Green when pump output is active
- (8): Heat and Cool indicator
o Green when cooling
o Red when Heating
o Red or Green blinking: RF alarm between the BT-M6Z02 RF and any device other than a thermostat
In RF linking mode Leds indicators (1) to (6) have a different meaning, Refer to 6.
3.B. Buttons
On BT-M6Z02-RF, there are 3 buttons “<”, “OK” and “>”.
They are used to:
- link elements to BT-M6Z02-RF: refer to section 7
- do a factory reset (reset all configuration and all RF links) : refer to section 7
3.C. DIP swith configuration
When you unscrew the front face of BT-M6Z02-RF, you have access to 4 switches used for advanced
configuration:
By default position is OFF for the 4 switches
Switch 1: Local / global Pump configuration (pump output AND remote pump device)
ON (global): BT-M6Z02-RF activates its pump if there is a heat or cool demand in the system
OFF (local): BT-M6Z02-RF activates its pump only if there is a demand on the BT-M6Z02-RF
Switch 2: NO / NC configuration
ON (NO): Outputs (actuators) are Normally Open
OFF (NC): Outputs (actuators) are Normally Closed
Switch 3: Pump Exercise configuration
ON: Once a week, pump output is activated.
OFF: No action on pump output
Switch 4: No action
4 WIRING ASSEMBLY DIAGRAM
(1) (2) (3) (4) (5) (6)
(7)
(8)
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Watts BT-M6Z02 - Radio Connection Box at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Watts BT-M6Z02 - Radio Connection Box in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info