805487
70
Zoom out
Zoom in
Previous page
1/72
Next page
70
5 Menù di configurazione
Il termostato possiede un menù di configurazione che consente di modificare le impostazioni del termostato in base alle
diverse esigenze di regolazione, quali ad esempio lunità di misura della temperatura (°C / °F).
Per accedere al menù dalla schermata principale, tenere premuto il tasto Modifica ( ) fino a che il display non visualizzi il
primo parametro (circa 5 sec).
- Selezionare il parametro da configurare con i tasti () e (), premere (OK) per impostarlo (il valore lampeggia),
modificare il valore con i tasti (-) e (+). Premere di nuovo il tasto (OK) per confermare limpostazione.
- Per uscire dal menù utente e tornare al menù principale, portarsi sul parametro Ende premere (OK).
Valori di fabbrica e altri valori possibili
01
dEG: unità di misura della temperatura
°C gradi centigradi Celsius
°F gradi Fahrenheit
04
AirC: Taratura della sonda ambiente
La taratura deve essere effettuata dopo 1 giorno di funzionamento con temperatura impostata invariata.
Posizionare un termometro in mezzo alla stanza ad una altezza di circa 1,5 m dal pavimento e rilevare la
temperatura dopo unora.
Quando si accede al parametro di calibrazione per la prima volta, questo indica noper segnalare che non è
mai stata fatta alcuna calibrazione.
Con i tasti (-) e (+) inserire il valore rilevato sul termometro e premere (OK) per confermare. Dovrebbe apparire
YES, ad indicare che è stata effettuata una calibrazione (il valore di calibrazione è stato memorizzato).
Se necessario, è possibile cancellare una calibrazione premendo il tasto Indietro ( ). La memoria sarà
cancellata e apparirà di nuovo no.
* Nota importante:
- Durante lintera fase di calibrazione dovrà essere in funzione solo lelemento scaldante comandato dal
termostato.
- Una differenza di temperatura troppo elevata può anche indicare unerrata installazione del termostato.
05
OutC, AMbC, FlrC:
Taratura della sonda esterna
La taratura della sonda esterna si esegue nello stesso modo di quella della sonda ambiente descritta sopra.
Lunica differenza è il posizionamento del termometro: da posare a terra in caso di una sonda esterna
utilizzata come sonda a pavimento; nelle vicinanze della sonda se questa è utilizzata come sonda ambiente
remota o sonda esterna.
* La calibrazione della sonda esterna OutCdeve essere eseguita con una temperatura di circa 20°C.
06
HG: Impostazione della temperatura antigelo in modalità Vacanza.
Valore di fabbrica: 10 °C.
Utilizzare i tasti (-) e (+) per modificare il valore e confermarlo con (Ok).
08
Clr ALL: Impostazioni di fabbrica
Consente di ripristinare le impostazioni di fabbrica (ora, programmi, ecc.)
Premere per 10 sec. il tasto (Ok)
* Attenzione:
Prima di utilizzare questa funzione assicurarsi di avere tutti i dati necessari alla messa in servizio del
termostato.
09
Versione software
VErS ___
10
End: Uscita dal menù utente
Premere il tasto (OK) per uscire dal menù e tornare alla schermata principale.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Watts BT D-01 - BELUX LIGHT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Watts BT D-01 - BELUX LIGHT in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info