805513
1
Zoom out
Zoom in
Previous page
1/3
Next page
ОПИСАНИЕ
-Электронный аналоговый термостат для температурного
регулирования в различных системах отопления.
-Современный дизайн
-Управление по встроенному датчику.
-Опция: управление по внешнему датчику (NTC 10K).
Внешний датчик подключается к выключенному термостату.
При включении термостат автоматически распознает подклю-
ченный к нему датчик (при подключении внешнего датчика,
управления осуществляется только по нему).
ПОКАЗАНИЯ СВЕТОДИОДА
Красный: Нагрев. Управление по встроенному датчику.
Оранжевый: Нагрев. Управление по внешнему датчику.
Красный мигающий
Интервал 0,5 секунд => сбой встроенного датчика
Интервал 1 секунда => сбой внешнего датчика
ТЕХНИЧЕСКИЕ ДАННЫЕ
Точность измерения
температуры
0,1 °C
Температура окружающей
среды и рабочая
температура:
0°C - 50°C
Температура транспорти-
ровки и хранения:
-10°C - +50°C
Диапазон регулирования
5 - 35 °C шагом 0,5°C
Регулирование
ПИ регулирование
(PWM, 2 C, цикл 10 минут)
Защита
Класс защиты II - IP 30
Питание
Срок службы батареек
2 AAA батареи LR03 1,5В
~2 года
Выход
Эл. мощность
2-жилы (свободный контакт)
Резьбовый клеммы <1.5мм².
макс. 3A 250В, 50Гц
Внешний датчик (опция)
NTC 10кOм при 25°C
Соответствие нормам
Ваш термостат разработан в со-
ответствии со следующими
стандартами или
нормативными документами:
EN 60730-1 : 2003
EN 61000-6-1 : 2002
EN 61000-6-3 : 2004
EN 61000-4-2 : 2001
2006/95/CE (низковотльтное
электрооборудование),
EMC 2004/108/CE (электромаг-
нитная совместимость)
PPLIMP13369 Ba
MODES DESCRIPTION
- Electronic analogical thermostat specially designed to control
different type of heating systems.
- Modern design
- Regulating on internal sensor.
- Option: Possibility to regulate on external sensor (NTC 10K).
The external sensor must be connected without power supply. At
power up the thermostat automatically detects the sensor used. (If
the external sensor is connected the regulation will use this
sensor).
LED INDICATOR
Red: Heating indication with internal sensor regulation.
Orange: Heating indication with external sensor regulation
Red blinking
0.5 second cycle => Internal sensor failure
1 second cycle => External sensor failure
TECHNICAL CHARACTERISTICS
Measured temperature
precision
0.1°C
Environmental:
Operating temperature:
Shipping and storage
temperature:
0°C - 50°C
-10°C to +50°C
Setting temperature range
5°C to 35°C
Regulation characteristics
minimum time to start and
stop
Proportional Band (PWM
2°C for 10min cycle)
2 minutes ON and OFF
Electrical Protection
Class II - IP30
Power Supply
Operating life
2 AAA LR03 1.5V Alkaline
~2 years
Type of output
Maximum Load
2 wires (free contact)
Screw connectors <1.5mm².
Up to 3A - 250Vac 50Hz
Optional External sensor
10k ohms at 25°C
Norms and homologation:
Your thermostat has been
designed in conformity with
the following standards or
other normative documents:
EN 60730-1 : 2003
EN 61000-6-1 : 2002
EN 61000-6-3 : 2004
EN 61000-4-2 : 2001
Low voltage 2006/95/CE
EMC 2004/108/CE
BT-A
FONCTION et DESCRIPTION
- Thermostat électronique analogique spécialement conçu pour
contrôler différentes installations de chauffage
- design moderne
- Régulation sur sonde interne
- Régulation sur sonde externe en option (NTC 10K).
Tout d’abord, connecter la sonde externe hors tension. A la mise
sous tension le thermostat régulera sur celle-ci.
VOYANT d’ETAT
Rouge fixe : Thermostat en chauffe (régulation sur sonde interne)
Orange fixe : Thermostat en chauffe (régulation sur sonde externe)
Rouge clignotant
Flash de 0.5 seconde => Défaut sur sonde interne
Flash de 1 seconde => Défaut sur sonde externe
TECHNICAL CHARACTERISTICS
Précision de mesure
0.1°C
Environnent. (Températures)
Fonctionnement:
Transport et stockage :
0°C - 50°C
-10°C à +50°C
Plage de réglage de la
température d’ambiance.
5°C à 35°C
Caractéristiques régulation
Temps minimum de marche et
d’arrêt.
Bande proportionnelle
2°C pour un cycle de 10min
2 Minutes ON et OFF
Protection électrique
Class II - IP30
Alimentation
Autonomie
2piles alkaline AAA LR03 1.5V
~2 ans
Type de sortie
Maximum Load
2 wires (free contact)
Screw connectors <1.5mm².
Up to 3A - 250Vac 50Hz
Sonde externe optionnelle
10k ohms à 25°C
Normes et homologation:
Votre thermostat a été conçu pour
répondre aux normes et directives
européennes suivantes:
EN 60730-1 : 2003
EN 61000-6-1 : 2002
EN 61000-6-3 : 2004
EN 61000-4-2 : 2001
Basse tension 2006/95/CE
CEM 2004/108/CE
BT-A
F
BETRIEBSARTEN
- Elektronisch-Analoges Thermostat für die Regelung
verschiedener Arten von Heizungssystemen.
- Modernes Design
- Steuerung über internen Raumfühler.
- Optional: Möglichkeit der Steuerung über externen Fühler (NTC
10K).
Der externe Fühler muss im stromlosen Zustand angeschlossen
werden. Bei Inbetriebnahme erkennt der Thermostat automatisch
den angeschlossenen Fühler. (Bei Anschluss eines externen
Fühlers erfolgt die Steuerung immer über diesen Fühler).
STATUS-ANZEIGE
Rot: Heizung in Betrieb. Steuerung über internen Raumfühler.
Orange: Heizung in Betrieb. Steuerung über externen Fühler.
Leuchte blinkt rot
0,5 Sekunden Intervall => Störung des internen Fühlers
1 Sekunde Intervall => Störung des externen Fühlers
TECHNISCHE DATEN
Genauigkeit der gemessenen
Temperatur
0,1 °C
Umgebungsbedingungen:
Betriebstemperatur:
Transport- und
Lagertemperatur:
0°C - 50°C
-10°C bis +50°C
Einstellbereich
Raumtemperatur
5 - 35 °C
Regelverhalten
Minimum Start und Stop Zeit
Proportionalbereich (PWM
2 °C bei 10-min-Zyklus)
2 Minuten EIN und AUS
Schutzart
Schutzklasse II - IP 30
Stromversorgung
Alkalibatterien LR03 1,5 V, Typ
AAA (Micro)
Ausgang
Schaltleistung
2-Draht (free contact)
Schraubklemmen <1.5mm².
Max. 3A - 250Vac 50Hz
Optionaler externer Fühler
NTC 10K bei 25°C
Normen und Zulassungen:
Ihr Thermostat hat in
Übereinstimmung mit den
folgenden Normen oder anderen
normativen Dokumenten
konzipiert:
EN 60730-1 : 2003
EN 61000-6-1 : 2002
EN 61000-6-3 : 2004
EN 61000-4-2 : 2001
Niederspannung 2006/95/CE
EMC 2004/108/CE
BT-A
DE
Room setting
LED indicator
Switch ON/OFF
Température de
confort
Voyant d’état
Switch ON/OFF
Einstellung
Solltemperatur
LED Leuchte
EIN / AUS Schalter
BT-A
RU
Рукоятка установки
температуры
Светодиод
Переключатель
вкл. - выкл.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Watts BT-A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Watts BT-A in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info