809768

VTech VM923 Manual

1
Zoom out
Zoom in
Previous page
1/2
Next page
Talk to your baby unit
Press and hold TALK and speak to your
parent unit. Your voice is transmitted to
the baby unit. When you finished talking,
release TALK to hear your baby again.
Basic operation - Parent unit
Overview - Parent unit
Turn off the screen
Press POWER/LCD OFF to switch off the
screen. You can still hear sounds from
the baby unit.
Tip
• Press any key on the parent unit to turn the
screen on again.
Use the menu
Press MENU to enter the menu, or save a setting. You can use the parent unit for advanced
settings or operations, such as to play or stop the baby unit’s lullaby or to adjust the baby
unit’s sound sensitivity.
1Battery LED light
23-level sound indicator light
3Arrow Keys
4MENU/SELECT
5LINK LED light
6TALK/EXIT
7POWER/LCD OFF
8Microphone
9Power jack
10 Antenna
11 RESET
12 Speaker
Parent unit icons
Overview - Baby unit
1Light sensor
2Camera
3Infrared LEDs
4Microphone
5POWER LED light
6 ON/OFF switch
7Speaker
8Antenna
9Power jack
10 Slots for wall mounting
11 PAIR/RESET key
While in the menu:
• Press or to scroll among the
menu options.
• Press or to select an item.
• Press SELECT to confirm your
selection.
• Press TALK/EXIT to exit the menu
and return to live view.
Adjust parent unit speaker volume
1. Press MENU when in idle mode.
2. Press SELECT to choose .
3. Press or to select the desired volume
level, then press SELECT to confirm your
selection.
Zoom
1. Press MENU when in idle mode.
2. Press or to choose .
3. Press SELECT to choose .
4. Press or to choose (Zoom in) or
(Zoom out), then press SELECT to
confirm your selection.
1 Connect the baby monitor
What’s in the box
4 Status check
Once you power on both
your baby unit and parent
unit, your parent unit
displays images from the
baby unit, and the LINK
LED light turns on.
3 Positioning the baby monitor
Quick start guide
The applied nameplate is located at the bottom of the
baby unit’s base.
When using your equipment, basic safety precautions
should always be followed to reduce the risk of fire,
electric shock and injury, including the following:
1. Follow all warnings and instructions marked on the
product.
2. Adult setup is required.
3. CAUTION: Do not install the baby unit at a height
above 2 metres.
4. This product is intended as an aid. It is not a substitute for
responsible and proper adult supervision and should not
be used as such.
5. This product is not intended for use as a medical
monitor.
6. Do not use this product near water, for example, near
to a bath, sink, swimming pool or shower.
7. CAUTION: Use only the battery provided. There may
be a risk of explosion if a wrong type of battery is used
for the parent unit. The battery cannot be subjected to
high or low extreme temperature and low air pressure
at high altitude during use, storage or transportation.
Disposal of battery in fire or a hot oven, mechanically
crushing or cutting or the battery can result in an
explosion. Leaving the battery in an extremely high
temperature surrounding environment can result in an
explosion or the leakage of flammable liquid of gas.
Battery subjected to extremely low air pressure may
result in an explosion or the leakage of flammable
liquid or gas. Dispose of used batteries according to the
information in instructions.
8. Use only the power adaptors included with this
product. Incorrect power adaptor polarity or voltage
can seriously damage the product.
Power adaptor information:
Parent unit output: 5V DC 1A
VTech Telecommunications Ltd.
Model:
VT05EUK05100
Baby unit output: 5V DC 1A
VTech Telecommunications Ltd.
Model:
VT05EUK05100
Rechargeable battery information:
Zhuhai Great Power Energy Co., Ltd.
Li-ion battery, 3.6V, 2600mAh, 9.36Wh;
Model: ICR18650-2.6Ah-3.6V-1S1P
9. The power adaptors are intended to be correctly
oriented in a vertical or floor mount position. The prongs
are not designed to hold the plug in place if it is plugged
into a ceiling, under-the-table or cabinet outlet.
10. For pluggable equipment, the socket-outlet should
be installed near the equipment and should be easily
accessible.
11. Unplug this product from the wall outlet before cleaning.
Do not use liquid or aerosol cleaners. Use a damp cloth
for cleaning.
12. Do not cut off the power adaptors to replace them
with other plugs, as this causes a hazardous situation.
13. Do not allow anything to rest on the power cords. Do
not install this product where the cords may be walked
on or crimped.
14. This product should be operated only from the type
of power source indicated on the marking label. If you
are not sure of the type of power supply in your home,
consult your dealer or electricity supply provider.
15. Do not overload wall outlets or use an extension cord.
16. Do not place this product on an unstable table, shelf,
stand or other unstable surfaces.
17. This product should not be placed in any area where
proper ventilation is not provided. Slots and openings
in the back or bottom of this product are provided for
ventilation. To protect them from overheating, these
openings must not be blocked by placing the product
on a soft surface such as a bed, sofa or rug. This product
should never be placed near or over a radiator or heat
source.
18. Never push objects of any kind into this product
through the slots because they may touch dangerous
voltage points or create a short circuit. Never spill liquid
of any kind on the product.
19. To reduce the risk of electric shock, do not
disassemble this product, but take it to an authorised
service facility. Disassembling or removing parts of
the product other than via the battery door may
expose you to dangerous voltages or other risks.
Incorrect reassembling can cause electric shock
when the product is subsequently used.
20. You should test the sound reception every time you
turn on the units or move one of the components.
21. Periodically examine all components for damage.
22. There is a very low risk of privacy loss when using
certain electronic devices, such as baby monitors,
cordless telephones, etc. To protect your privacy,
make sure the product has never been used before
purchase, reset the baby monitor periodically by
powering off and then powering on the units, and
power off the baby monitor if you are not intending
to use it for some time.
23. The small parts of this monitor can be swallowed by
babies or small children. Keep these parts out of reach
of children.
24. Children should be supervised to ensure that they do
not play with the product.
25. The product is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
SAVE THESE INSTRUCTIONS
Cautions
1. Use and store the product at a temperature between
0
o
C and 40
o
C.
2. Do not expose the product to extreme cold, heat
or direct sunlight. Do not put the product close to a
heating source.
3. Mishandling batteries can cause burn, fire or
explosion hazards.
4. Batteries should not be exposed to excessive heat such
as bright sunshine or fire.
5. Warning—Strangulation Hazard—
Children have STRANGLED in cords.
Keep this cord out of the reach of
children (more than 0.9m away). Do not
remove warning label on the adaptor
cord.
6. Never place the baby unit(s) inside the baby’s cot or
playpen. Never cover the baby unit(s) or parent unit
with anything such as a towel or a blanket.
7. Other electronic products may cause interference
with your baby monitor. Try installing your baby
monitor as far away from these electronic devices
as possible: wireless routers, radios, cellular
telephones, intercoms, room monitors, televisions,
personal computers, kitchen appliances and
cordless telephones.
Important safety instructions
Caution
• The default volume of your parent unit
is level 3, and the maximum volume
is level 5. If you experience feedback
noise from your baby monitor while
positioning:
- Make sure your baby unit and parent unit
are more than 1 metre apart, OR
- Turn down the volume of your parent unit.
NOTESNOTE
Note
• To avoid interference from other electronic devices,
place your baby monitor at least 1 metre away
from devices such as wireless routers, microwaves,
mobile phones and computers.
The baby unit’s POWER LED
light turns on.
≥
<
1m
1m
﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
﹏﹏﹏
﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏
﹏﹏﹏﹏﹏
Caution
• Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the
baby’s cot or playpen.
710
8
9
1
2
5
3
4
6
11
7
10
8
9
1
2
5
3
4
6
11
7
10
8
9
1
2
5
3
4
6
11
x 2 x 2
VM923
2.8” Pan & Tilt
Video Baby Monitor
NOTESNOTE
• The rechargeable battery in the parent unit is
built-in.
• Use only the power adaptors supplied with this
product.
• Make sure the baby monitor is not connected to
a switch-controlled electric outlet.
• Connect the power adaptor in a vertical or floor
mount position only. The adaptor prongs are not
designed to hold the weight of a baby monitor,
so do not connect them to any ceiling, under-the-
table, or cabinet outlets. Otherwise, the adaptor
may not properly connect to the mains.
• Make sure the parent unit, the baby unit and
the power adaptor cords are out of reach of
children.
Strangulatio n
Hazard
Keep this cord out of reach of children.
The cord needs to be at least three feet
away from the child at all times. Do not
use with an extension cord. Do not
remove this tag.
Éloignez ce cordon des enfants. Le
cordon doit se trouver à au moins trois
pieds d’un enfant et ce, en tout temps.
N’utilisez pas de rallonge. Ne retirez pas
cette étiquette.
Mantenga este cable fuera de la alcance
de los niños. Este cable debe estar por
lo menos tres pies fuera de la alcance
del niño en todo momento. No lo use
con una extensión inalámbrica. No quite
esta etiqueta.
Risque
d’étranglement
Riesgo de
estrangulación
Strangulatio n
Hazard
Keep this cord out of reach of children.
The cord needs to be at least three feet
away from the child at all times. Do not
use with an extension cord. Do not
remove this tag.
Éloignez ce cordon des enfants. Le
cordon doit se trouver à au moins trois
pieds d’un enfant et ce, en tout temps.
N’utilisez pas de rallonge. Ne retirez pas
cette étiquette.
Mantenga este cable fuera de la alcance
de los niños. Este cable debe estar por
lo menos tres pies fuera de la alcance
del niño en todo momento. No lo use
con una extensión inalámbrica. No quite
esta etiqueta.
Risque
d’étranglement
Riesgo de
estrangulación
Technical specications
Frequency control Crystal controlled PLL synthesizer
Transmit frequency Baby unit: 2405 - 2475 MHz
Parent unit: 2405 - 2475 MHz
Maximum power used by the transmitter: 0.1W (100mW)
Channels 32
LCD 2.8” Colour LCD (QVGA 320x240 pixel)
Nominal effective
range
Actual operating range may vary according to environmental
conditions at the time of use.
Power requirements Parent unit: 3.6V, 2600mAh, 9.36Wh Li-ion battery
Parent unit power adaptor:
Output: 5V DC @ 1A
Baby unit power adaptor:
Output: 5V DC @ 1A
Specifications are subject to change without notice.
© 2022 VTech Telecomunications Ltd.
All rights reserved. 08/22. VM923_PlaySmart_EN_QSG_V1
> 1 m
Main
menu Sub-menu
Volume
Parent unit speaker volume
• Adjust the parent unit’s speaker volume.
Settings
Zoom
• Zoom in and out of the video displayed from the baby unit.
Screen off timer
• The parent unit display will turn off to conserve energy after your chosen
amount of time inactive.
Brightness
• Adjust the parent unit’s LCD screen brightness level.
Temperature
• Turn on/off temperature alert tone.
• Set the parent unit to beep whenever the room temperature detected by the
baby unit falls outside of the set temperature range.
• Set the minimum/maximum temperature.
• Set temperature display in Fahrenheit (oF) or Celsius (oC).
Main menu icons
Status icons
Connection status
• or displays when strong signal strength is detected between the baby
unit and the parent unit.
• or displays when moderate or low signal strength is detected between
the baby unit and the parent unit.
Current view status
• Displays the baby unit number of the baby unit being viewed.
Zoom
• Displays when the current image on the parent unit has been zoomed in.
Night vision
• Displays when the baby unit being viewed has activated the night vision
feature.
Talkback
• Displays when the parent unit is talking to the baby unit.
Lullaby
• Displays when a lullaby is playing.
Mute alert
• Displays when the parent unit speaker volume is set to zero.
• Displays when the parent unit is talking to the baby unit.
or
Real-time temperature
• Displays the real-time temperature detected by the baby unit in Fahrenheit (oF)
or Celsius (oC) (e.g. 57
oF or 14
oC).
Battery status
• animates when the battery is charging.
• displays solid when the battery is fully charged.
• displays when the battery is low and needs charging.
Status icons
Main menu icons
Sub-menu icons
Submenu
Main menu
2 Power on or off the baby monitor
Slide the ON/OFF switch to power
on or off your baby unit.
Press and hold POWER to power on or off
your parent unit.
Charge the parent unit battery
When you have connected and turned the parent unit on, the battery charges automatically.
NOTESNOTE
Notes
• Before using the baby monitor for the first time, charge the parent unit battery for 12 hours. When
the parent unit battery is fully charged, the battery icon becomes solid .
• It takes longer to charge the battery when the parent unit is turned on. To shorten the charging time,
turn the parent unit off while charging.
• The standby time varies depending on the sensitivity level you set, your actual use and the age of
the battery.
The battery icon indicates the battery status (see the following table).
Battery indicators Battery status Action
The screen displays .
The light flashes.
The battery has very little
power and may only be used
for a short time.
Charge
without interruption
(about
30 minutes).
The battery icon becomes
solid .
The battery is fully charged. To keep the battery charged, connect
it to AC power when in use.
Connect the baby monitor (cont’d)
Press and hold
1
2
4
5
6
8
7
9
11
12
3
10
1
2
4
5
6
8
7
9
11
12
3
10
Press and hold
Quick start guide
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VTech VM923 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VTech VM923 in the language / languages: English as an attachment in your email.

The manual is 5.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info