Manual VTech VM919HD (page 1 of 2) (English)

809767

Zoom out

Zoom in

1/2

> 3ft (1m)

NOTESNOTE

• The rechargeable battery in the parent unit

is built-in.

• Use only the power adaptors supplied with

this product.

• Make sure the parent unit and the baby unit

are not connected to the switch controlled

electric outlets.

• Connect the power adaptors in a vertical

or ﬂoor mount position only. The adaptors’

prongs are not designed to hold the weight

of the parent unit and the baby unit, so do not

connect them to any ceiling, under-the-table,

or cabinet outlets. Otherwise, the adaptors may

not properly connect to the outlets.

• Make sure the parent unit, the baby unit and

the power adaptor cords are out of reach of

children.

Speciﬁcations are subject to change without notice.

07/22. VM919HD_UK_QSG_V2.

VM919HD

Full Colour Pan and Tilt

HD Video Monitor

1 Connect the baby monitor

Power on or off the baby monitor

What’s in the box

Status check

Once you power on both your

baby unit and parent unit, your

parent unit displays images from

the baby unit, and the LINK LED

light turns on.

The baby unit green LED light

also turns on.

3 Positioning the baby monitor

Caution

• The default volume of your parent unit is

level 3, and the maximum volume is level

5. If you experience feedback from your

baby monitor while positioning:

- Make sure your baby unit and parent

unit are more than 1 meter apart, OR

- Lower the volume of your parent unit.

NOTESNOTE

Note

• To avoid interference from other electronic

devices, place your baby monitor at least 1 metre

away from devices such as wireless routers,

microwaves, mobile phones and computers.

Use the menu

Press MENU to enter the menu, choose a

menu item, or save a setting. You can use

the parent unit for advanced settings or

operations, such as to play or stop the baby

unit lullaby, or to adjust the baby unit sound

sensitivity.

While in the menu:

• Press , , or to scroll among the

menu options.

• Press SELECT to select an item, or to save

a setting.

• Press TALK to return to the live video.

• Press to go to the Help & info page.

Basic operation - Parent unit

Overview - Parent unit

Important safety instructions

1LINK LED light

2 LED light

33- level sound indicator

light

4TALK

• Press and hold to talk to

the baby unit.

• While in a submenu,

press to exit.

• Press to zoom in/out.

• When in the main menu,

press to go to the

Help & Info page.

6Arrow keys

7MENU/SELECT

• Press to enter the main

menu.

• While in a menu, press to

choose an item, or save a

setting.

8- VOL/ VOL +

• Increase or decrease

parent unit’s volume.

9Microphone

10 POWER key

11 Power jack

12 RESET

• Force reboot the parent

unit.

13 Antenna

14 Speaker

15 Stand

Parent unit icons

Quick start guide

x 2

Quick start guide

Charge the parent unit

battery before use

When you connect and turn

the parent unit on, the battery

will charge automatically.

Slide the switch to ON to power on

your baby unit.

After the parent unit is fully charged,

press POWER until the welcome

screen appears.

Connect the baby monitor (Cont’d)

< 3m

> 3m

≥

< 3ft (1m)

3ft (1m)

﹏﹏﹏﹏﹏﹏

﹏﹏﹏﹏﹏﹏﹏﹏

﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏

﹏﹏﹏

﹏﹏﹏﹏

﹏﹏﹏﹏﹏

Adjust speaker volume

Pressing -VOL / VOL+ adjusts the parent

unit speaker volume level received from

the baby unit.

Muted

Zoom

Press to zoom in or out.

Talk to your baby via the baby unit

1. Press and hold the TALK key.

2. When the icon displays on screen,

speak to your parent unit. Your voice is

transmitted to the baby unit.

3. When ﬁnished talking, release

the TALK key to hear your baby again.

Press and hold

Turn on/off the parent unit screen

You can turn on or turn off the parent

unit screen without powering off the

parent unit. You can still hear sound from

the baby unit.

• Press POWER on the parent unit to

turn off the screen.

• Press any keys on the parent unit to

turn on the screen again.

The applied nameplate is located at the bottom of the baby

unit’s base.

When using your equipment, basic safety precautions

should always be followed to reduce the risk of ﬁre, electric

shock and injury, including the following:

1. Follow all warnings and instructions marked on the

product.

2. Adult setup is required.

3. CAUTION: Do not install the baby unit at a height above

2 metres.

4. This product is not a substitute for adult supervision of the

infant. Supervising the infant is the responsibility of the

parent or carer. This product could cease operating, and

therefore you should not assume it will continue working

properly for any given period of time. Further, this is not a

medical device and should not be used as such. This product

is intended to assist you in supervising your baby.

5. Do not use this product near water, for example, near to a

bath, sink, swimming pool or shower.

6. CAUTION: Use only the battery provided. There may be a risk

of explosion if a wrong type of battery is used for the parent

unit. The battery cannot be subjected to high or low extreme

temperature and low air pressure at high altitude during use,

storage or transportation. Disposal of battery into ﬁre or a hot

oven, or mechanically crushing or cutting or the battery can

result in an explosion. Leaving the battery in an extremely

high temperature surrounding environment can result in an

explosion or the leakage of ﬂammable liquid of gas. Battery

subjected to extremely low air pressure may result in an

explosion or the leakage of ﬂammable liquid or gas. Dispose of

used battery according to the instructions.

7. Use only the power adaptors included with this product.

Incorrect power adaptor polarity or voltage can seriously

damage the product.

Power adaptor information:

Parent unit output: 5V DC 2A

VTech Telecommunications Ltd.

Model: VT05EEU05200 (EU), VT05EUK05200 (UK).

Baby unit output: 5V DC 1A.

VTech Telecommunications Ltd.

Model: VT05EEU05100 (EU), VT05EUK05100 (UK).

Rechargeable battery information:

3.7V 5000mAh, 18.5Wh Lithium-ion battery

Zhuhai Great Power Energy Co., Ltd.

Model: GSP806090-5Ah-3.7V-1S1P

8. The power adaptors are intended to be correctly

oriented in a vertical or ﬂoor mount position. The prongs

are not designed to hold the plug in place if it is plugged

into a ceiling, under-the-table or cabinet outlet.

9. For pluggable equipment, the socket-outlet should

be installed near the equipment and should be easily

accessible.

10. Unplug this product from the wall outlet before cleaning.

Do not use liquid or aerosol cleaners. Use a damp cloth for

cleaning.

11. Do not cut off the power adaptors to replace them with

other plugs, as this causes a hazardous situation.

12. Do not allow anything to rest on the power cords. Do not

install this product where the cords may be walked on or

crimped.

13. This product should be operated only from the type

of power source indicated on the marking label. If you

are not sure of the type of power supply in your home,

consult your dealer or local power company.

14. Do not overload wall outlets or use an extension cord.

15. Do not place this product on an unstable table, shelf, stand

or other unstable surfaces.

16. This product should not be placed in any area where

proper ventilation is not provided. Slots and openings

in the back or bottom of this product are provided for

ventilation. To protect them from overheating, these

openings must not be blocked by placing the product on

a soft surface such as a bed, sofa or rug.

This product should never be placed near or over a

radiator or heat source.

17. Never push objects of any kind into this product through

the slots because they may touch dangerous voltage

points or create a short circuit. Never spill liquid of any

kind on the product.

18. To reduce the risk of electric shock, do not disassemble

this product, but take it to an authorized service facility.

Opening or removing parts of the product other than

speciﬁed access doors may expose you to dangerous

voltages or other risks. Incorrect reassembling can

cause electric shock when the product is subsequently

used.

19. You should test the sound reception every time you turn

on the units or move one of the components.

20. Periodically examine all components for damage.

21. There is a very low risk of privacy loss when using certain

electronic devices, such as baby monitors, cordless

telephones, etc. To protect your privacy, make sure the

product has never been used before purchase, reset

the baby monitor periodically by powering off and then

powering on the units, and power off the baby monitor

if you will not use it for some time.

22. Children should be supervised to ensure that they do not

play with the product.

23. The product is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning

use of the appliance by a person responsible for their

safety.

SAVE THESE INSTRUCTIONS

Cautions

1. Use and store the product at a temperature between 0oC

and 40oC.

2. Do not expose the product to extreme cold, heat or

direct sunlight. Do not put the product close to a heating

source.

3. Batteries should not be exposed to excessive heat such as

bright sunshine or ﬁre.

4. Warning—Strangulation Hazard—

Children have STRANGLED in cords. Keep

this cord out of the reach of children (more

than 0.9m away. Do not remove this tag.

5. Never place the baby unit(s) inside the

baby’s crib or playpen. Never cover the baby unit(s) or

parent unit with anything such as a towel or a blanket.

6. Other electronic products may cause interference

with your baby monitor. Try installing your baby

monitor as far away from these electronic devices

as possible: wireless routers, radios, cellular

telephones, intercoms, room monitors, televisions,

personal computers, kitchen appliances and cordless

telephones.

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless devices):

Wireless Technology Research, LLC (WTR), an independent

research entity, led a multidisciplinary evaluation of the

interference between portable wireless devices and

implanted cardiac pacemakers. Supported by the U.S. Food

and Drug Administration, WTR recommends to physicians that:

Pacemaker patients

• Should keep wireless devices at least six inches from the

pacemaker.

• Should NOT place wireless devices directly over the

pacemaker, such as in a breast pocket, when it is turned ON.

WTR’s evaluation did not identify any risk to bystanders with

pacemakers from other persons using wireless devices.

Electromagnetic ﬁelds (EMF)

This VTech product complies with all standards regarding

electromagnetic ﬁelds (EMF). If handled properly and

according to the instructions in this user’s manual, the product

is safe to be used based on scientiﬁc evidence available today.

Main menu

Melodies and soothing sounds

Melodies and Soothing Sounds

• Select play all melodies, or play one of the

ﬁve melodies and four soothing sounds.

Timer

• You can also set the timer to stop playing

after 15, 30 or 60 minutes, or playing non-

stop.

Alerts - Sound, motion and temperature

Sound

• Select sound Sensitivity level.

• Turn on/off Sound Detection Alert.

• Turn on/off Auto Wake Up function.

(See Sound Detection and Auto Wake Up

section)

Motion

• Turn on/off Motion Alert.

• Select motion Sensitivity level.

(See Motion Detection section)

Main menu

Temperature

• Turn on/off Temperature Alert.

Set the parent unit to beep whenever the

room temperature detected by the baby

unit falls outside of the set temperature

range.

• Select Minimum temperature for alert

range.

• Select Maximum temperature for alert

range.

• Select temperature Format.

Set temperature display in Fahrenheit (oF)

or Celsius (oC ).

Parent unit settings

• Adjust parent unit screen Brightness.

• Turn on/off Dim Mode.

Baby unit settings

• Turn on/off baby unit’s Status LED.

• Select Field of View.

Choose Wide angle or Standard .

• Adjust baby unit’s speaker Volume.

General settings

• Turn on/off Low Battery Alert Tone.

Set the parent unit to beep when the

battery is low.

• Turn on/off No Link Alert Tone.

Set the parent unit to beep when the link

between the parent unit and the baby unit

is lost.

• Add baby unit.

• Remove baby unit.

Main menu icons

Current view status.

Night vision feature is activated automatically.

Motion alert is turned on.

Sound detection alert is turned on.

Melodies or soothing sound are turned on.

Parent unit speaker is muted.

Temperature alert is turned on.

Real-time temperature indicator

Battery status indicator

Status icons

Alert icons

• Displays when parent unit battery is low and

needs charging.

• Displays when motion is detected at a baby

unit.

• Displays when sound is detected at a baby

unit.

• Baby unit detection temperature exceeds

the set maximum.

• Baby unit detection temperature is lower

than the set minimum.

Overview - Baby unit

1Microphone

2Camera lens

3Light sensor

4LED indicator

5Infrared LEDs

6 ON/OFF switch

7Antenna

8Speaker

9Temperature sensor

• Position the sensor

horizontally for optimal

usage.

Caution

• Do not bend the temperature

sensor upward.

10 Power jack

11 Threaded socket for wall

mounting

12 Pair button

NOTESNOTE

Notes

• Before using the baby monitor for the ﬁrst time, charge the parent unit battery for 12 hours.

When the parent unit battery is fully charged, the battery icon becomes solid .

• It takes longer to charge the battery when the parent unit is turned on. To shorten the charging

time, turn the parent unit off while charging.

• The standby time varies depending on the sensitivity level you set, your actual use and the age of

the battery.

The battery icon indicates the battery status (see the following table).

Battery indicators Battery status Action

The screen displays .

The light ﬂashes.

The battery has very little

charge and may be used for

only a short time.

Charge

without interruption

(about

30 minutes).

The battery icon becomes

solid .

The battery is fully charged. To keep the battery charged, connect

it to AC power when not in use.

Connect the baby unit

Raise the parent unit antenna

for better reception

> 1 metre

< 1 metre

> 1 metre

< 1 metre

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of VTech VM919HD in the language / languages: English as an attachment in your email.

The manual is 6.39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of VTech VM919HD

VTech VM919HD User Manual - German - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

VTech VM919HD Manual

Product: