Manual VTech VM3263 (page 1 of 2) (English)

809761

Zoom out

Zoom in

1/2

Speciﬁcations are subject to change without notice.

VM3263

2.8” Video Monitor

with Night Light

1 Connect the baby monitor

Power on or off the baby monitor

What’s in the box

Status check

Once you power on the parent

unit, the parent unit displays

image from the baby unit, and

the LINK LED light turns on.

3 Positioning the baby monitor

Quick start guide

Talk to your baby unit

Press and hold TALK and speak to your

parent unit. Your voice is transmitted to

the baby unit. When ﬁnished talking,

release the TALK key to hear your baby

again.

Basic operation - Parent unit

Overview - Parent unit

Technical specications

Credits:

The Background Noise sound ﬁle was created by Caroline Ford, and is used under the Creative Commons license.

The Stream Noise sound ﬁle was created by Caroline Ford, and is used under the Creative Commons license.

The applied nameplate is located at the bottom of the baby unit’s

base.

When using your equipment, basic safety precautions should

always be followed to reduce the risk of ﬁre, electric shock

and injury, including the following:

1. Follow all warnings and instructions marked on the

product.

2. Adult setup is required.

3. CAUTION: Do not install the baby unit at a height above

2 metres.

4. This product is intended as an aid. It is not a substitute for

responsible and proper adult supervision and should not

be used as such.

5. This product is not intended for use as a medical monitor.

6. Do not use this product near water, for example, near to

a bath, sink, swimming pool or shower.

7. CAUTION: Use only the battery provided. There may be

a risk of explosion if a wrong type of battery is used for

the parent unit. The battery cannot be subjected to high

or low extreme temperature and low air pressure at high

altitude during use, storage or transportation. Disposal

of battery in ﬁre or a hot oven, mechanically crushing or

cutting the battery can result in an explosion. Leaving the

battery in an extremely high temperature surrounding

environment can result in an explosion or the leakage of

ﬂammable liquid of gas. Battery subjected to extremely

low air pressure may result in an explosion or the leakage

of ﬂammable liquid or gas. Dispose of used batteries

according to the information in instructions.

8. Use only the power adaptors included with this product.

Incorrect power adaptor polarity or voltage can seriously

damage the product.

Power adaptor information:

Parent unit output: 5V DC 1A

VTech Telecommunications Ltd.

Model: VT05EUK05100

Baby unit output: 5V DC 1A.

VTech Telecommunications Ltd.

Model: VT05EUK05100

Rechargeable battery information:

Zhuhai Great Power Energy Co., Ltd.

Li-ion battery, 3.6V, 2600mAh, 9.36Wh;

Model: ICR18650-2.6Ah-3.6V-1S1P

9. The power adaptor is intended to be correctly oriented

in a vertical or ﬂoor mount position. The prongs are not

designed to hold the plug in place if it is plugged into a

ceiling, under-the-table or cabinet outlet.

10. For pluggable equipment, the socket-outlet (power

adaptor) should be installed near the equipment and

should be easily accessible.

11. Unplug this product from the wall outlet before cleaning.

Do not use liquid or aerosol cleaners. Use a damp cloth

for cleaning.

12. Do not modify the power adaptors or replace with other

adaptors, as this causes a hazardous situation.

13. Do not allow anything to rest on the power cords. Do not

install this product where the cords may be walked on or

crimped.

14. This product should be operated only from the type

of power source indicated on the marking label. If you

are not sure of the type of power supply in your home,

consult your dealer or electricity supply provider.

15. Do not overload wall outlets or use an extension cord.

16. Do not place this product on an unstable table, shelf,

stand or other unstable surfaces.

17. This product should not be placed in any area where

proper ventilation is not provided. Slots and openings

in the back or bottom of this product are provided for

ventilation. To protect them from overheating, these

openings must not be blocked by placing the product

on a soft surface such as a bed, sofa or rug. This product

should never be placed near or over a radiator or heat

source.

18. Never push objects of any kind into this product through

the slots because they may touch dangerous voltage

points or create a short circuit. Never spill liquid of any

kind on the product.

19. To reduce the risk of electric shock, do not disassemble

this product, but take it to an authorised service facility.

Disassembling or removing parts of the product other

than via the battery door may expose you to dangerous

voltages or other risks. Incorrect reassembling can cause

electric shock when the product is subsequently used.

20. You should test the sound reception every time you turn

on the units or move one of the components.

21. Periodically examine all components for damage.

22. There is a very low risk of privacy loss when using certain

electronic devices, such as baby monitors, cordless

telephones, etc. To protect your privacy, make sure the

product has never been used before purchase, reset the

baby monitor periodically by powering off and then

powering on the units, and power off the baby monitor

if you are not intending to use it for some time.

23. Children should be supervised to ensure that they do not

play with the product.

24. The small parts of this monitor can be swallowed by

babies or small children. Keep these parts out of reach

of children.

25. The product is not intended for use by persons (includ-

ing children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety.

SAVE THESE INSTRUCTIONS

Cautions

• Use and store the product at a temperature between 0oC

and 40oC.

• Mishandling batteries can cause burn, ﬁre or explosion

hazards.

• Batteries should not be exposed to excessive heat such

as bright sunshine or ﬁre.

• Do not expose the product to extreme cold, heat or

direct sunlight. Do not put the product close to a heating

source.

• Warning—Strangulation Hazard—

Children have STRANGLED in cords. Keep

this cord out of the reach of children (more

than 0.9m away). Do not remove warning

label on the adaptor cord.

• Never place the camera unit(s) inside the baby’s cot or

playpen. Never cover the camera unit(s) or parent unit

with anything such as a towel or a blanket.

• Other electronic products may cause interference with

your camera unit. Try installing your camera unit as far

away from these electronic devices as possible: wireless

routers, radios, cellular telephones, intercoms, room

monitors, televisions, personal computers, kitchen appli-

ances and cordless telephones.

Important safety instructions

Frequency control Crystal controlled PLL synthesizer

Transmit frequency Baby unit: 2405 - 2475 MHz

Parent unit: 2405 - 2475 MHz

Maximum power used by the transmitter: 0.1W (100mW)

Channels 32

LCD 2.8” Colour LCD

(QVGA 320x240 pixel)

Nominal effective range Actual operating range may vary according to environmental

conditions at the time of use.

Power requirements Parent unit: 3.6V, 2600mAh Li-ion, 9.36Wh Li-ion battery

Baby unit power adaptor: Output: 5V DC @ 1A

Parent unit power adaptor: Output: 5V DC @ 1A

Connect the baby unit to a power

supply to turn it on. Disconnect the

baby unit to turn it off.

Press and hold POWER to power on or off

your parent unit.

Caution

• The default volume of your parent unit

is level 3, and the maximum volume

is level 5. If you experience feedback

noise from your baby monitor while

positioning:

- Make sure your baby unit and parent unit

are more than 1 m apart, OR

- Turn down the volume of your parent unit.

NOTESNOTE

Note

• To avoid interference from other electronic devices,

place your baby monitor at least 1 m away from

devices such as wireless routers, microwaves, cell

phones and computers.

Press and hold

Turn off the screen

Press POWER/LCD OFF to switch off the

screen. You can still hear sound from the

selected baby unit.

Tip

• Press any key on the parent unit to turn on

the screen again.

Use the menu

Press MENU to enter the menu, or save a setting. You can use the parent unit for advanced

settings or operations, such as to play or stop the baby unit’s lullaby, or to adjust the baby

unit sound sensitivity.

While in the menu:

• Press or to scroll among

the menu options.

• Press or to select an item.

• Press SELECT to conﬁrm your

selection.

• Press TALK/EXIT to exit the

menu and return to live view.

Quick start guide

NOTESNOTE

• The rechargeable battery in the parent unit is built-in.

• Use only the power adaptors supplied with this product.

• Make sure the parent unit and the baby unit are not connected to an electronically controlled electric outlet.

• Connect the power adaptors in a vertical or ﬂoor mount position only. The adaptor prongs are not designed

to hold the weight of the parent unit and the baby unit, so do not connect them to any ceiling, under-the-ta-

ble, or cabinet outlets. Otherwise, the adaptors may not properly connect to the outlets.

• Make sure the parent unit, the baby unit and the power adaptor cords are out of reach of children.

Parent unit icons

≥

<1m

﹏﹏﹏﹏﹏﹏

﹏﹏﹏﹏﹏﹏﹏﹏

﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏

﹏﹏﹏

﹏﹏﹏﹏

﹏﹏﹏﹏﹏

Caution

• Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the

baby’s cot or playpen.

Overview - Baby unit

Pan and Tilt the Baby Unit

• Press Arrow keys to pan and tilt

the Baby Unit.

Zoom

1. Press MENU when in idle mode.

2. Choose .

3. Press or to choose (Zoom in) or

(Zoom out), then press SELECT to

conﬁrm your selection.

Press and hold

1 Night light key

2Light Sensor

3Camera lens

4Infrared LEDs

5Microphone

6Night light

7PAIR key

• The parent unit and baby unit provided

are already paired.

8Speaker

9Temperature sensor

10 Power jack

11 Slots for wall mounting

1 Connect the baby monitor (cont’d)

Charge the parent unit battery

When you have connected and turned on the parent unit, the battery will be charged

automatically.

NOTESNOTE

Notes

• Before using the baby monitor for the ﬁrst time, charge the parent unit battery for 12 hours. When

the parent unit battery is fully charged, the battery icon becomes solid .

• It takes longer to charge the battery when the parent unit is turned on. To shorten the charging time,

turn the parent unit off while charging.

• The standby time varies depending on the sensitivity level set, your actual use and the age of the

battery.

The battery icon indicates the battery status (see the following table).

Battery indicators Battery status Action

The screen displays .

The light ﬂashes.

The battery has very little

charge and may be used for

only a short time.

Charge

without interruption

(about

30 minutes).

The battery icon becomes

solid .

The battery is fully charged. To keep the battery charged, connect

it to AC power when not in use.

1Antenna

2Battery LED light

33-level sound indicator light

4Arrow keys

5MENU/SELECT

6LINK LED light

• On when the parent unit is linked to the

baby unit.

• Flashes when the link to the baby unit is lost.

7TALK/EXIT

• Press and hold to talk to the baby unit.

• While in a submenu, press to exit.

8POWER/LCD OFF

9Microphone

10 Power jack

11 RESET

• Force reboot the parent unit.

12 Speaker

Submenu

Main menu

Main

menu Sub-menu

Volume

• Adjust the parent unit’s speaker

volume.

Settings

Brightness

• Adjust the parent unit’s LCD screen

brightness level.

Screen off timer

• The parent unit display will dim to

conserve energy after your selected

time of inactivity.

Zoom

• Zoom in and out of the video

displayed from the baby unit.

Temperature

• Set temperature display in Fahrenheit (oF)

or Celsius (oC).

• Set the minimum/maximum temperature.

• Turn on/off temperature alert tone.

• Set the parent unit to beep whenever the

room temperature detected by the baby

unit falls outside of the set temperature

range.

Main menu icons

Status icons

Connection status

• or displays when strong signal strength is

detected between the baby unit and the parent unit.

• or displays when moderate or low signal strength is

detected between the baby unit and the parent unit.

Current view status

• Displays the number of the baby unit that is being viewed.

Zoom

• Displays when the current image on the parent unit has

zoomed in.

Night vision

• Displays when the baby unit being viewed has activated

the night vision feature.

Lullaby

• Displays when a lullaby is playing.

Talkback

• Displays when talking back to the baby unit from the

parent unit.

Night light

• Displays when the baby unit’s night light is turned on.

• Displays when the night light Auto-on feature is activated,

but not yet triggered by sound.

• Displays when the baby unit’s night light has been

triggered to turn on automatically by sound.

Mute alert

• Displays when the parent unit speaker volume is set to

zero.

• Displays when the parent unit is talking to the baby unit.

Real-time temperature

• Displays the real-time temperature detected by the baby

unit in Fahrenheit (oF) or Celsius (oC) (e.g. 57

oF or 14

oC).

Battery status

• animates when the battery is charging.

• displays solid when the battery is fully charged.

• displays when the battery is low and needs charging.

Main

menu Sub-menu

Sound Detection

Sound-activated screen

• When turned on, and the baby

unit detects no sound, the parent

unit screen stays off to save power.

Once sound is detected, the parent

unit screen and speaker turns on

automatically, and you can see and

hear your baby. The parent unit will

then turn off again after 50 seconds

of no sound detection.

NOTESNOTE

Note

• When the parent unit screen is off

and it receives alerts, for example,

link lost between parent unit and

baby unit, or battery is low, the

parent unit screen and speaker will

turn on for 10 seconds.

VOX (Voice Activated Alert) Sensitivity

• You can choose to hear sounds

from the baby unit continuously,

or to only hear sounds that exceed

a set sensitivity level. Adjust the

microphone sensitivity of your baby

unit, the higher the sensitivity level,

the more sensitive the baby unit is in

detecting sounds to be transmitted to

the parent unit. See Sound sensitivity

and sound activation section.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of VTech VM3263 in the language / languages: English as an attachment in your email.

The manual is 4.82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

VTech VM3263 Manual

Product: