809849

VTech Phones VSP605A - Range Extender Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
Overview of the Range Extender
1. Setup Button Combined with LED Indicator
The button is used to initiate registration/deregistration process. The LED
indicator is used to show the link or usage status of the Range Extender.
LED Description
Colour Pattern
- - Powered off.
Red/
Green
Toggle The Range Extender is in registration mode.
Green Triple Flash Registration is completed successfully.
Green Steady On Good link to the telephone base.
Yellow Steady On Weak link to the telephone base.
Red Slow Flash No link to the telephone base.
Green Double
Flash
The Range Extender is in use with a good
link to the telephone base.
Yellow Double
Flash
The Range Extender is in use with a weak
link to the telephone base.
3Overview
Follow the instructions below to register the VSP605A Range Extender to
your VTech ErisTerminal™ SIP Phone.
Register the Range Extender to VTech ErisTerminal™ SIP Phone:
Make sure the Range Extender is not connected to AC power before registering.
Set the telephone base into registration mode (refer to the user’s
manual of your VTech ErisTerminal™ SIP Phone).
Use the AC adaptor to connect the Range Extender to a mains socket.
Press and hold the button for 5 seconds. The Range Extender will
start the registration to the telephone base.
Note
The registration mode of the Range Extender could last for 30 minutes.
1.
2.
3.
4Registration
5Troubleshooting
Problem Solutions
The LED on the Range
Extender won’t stop
flashing.
Move the Range Extender closer to the
telephone base.
Check for interference from electronic devices.
Make sure the Range Extender is not too
close to metal objects or thick walls.
•
•
•
Calls will not handover to
the Range Extender.
Make sure the Range Extender is within the
telephone base’s good signal range.
Make sure there are at least 11 metres
between Range Extenders.
•
•
I used to be able to
connect to the telephone
base, but now I cannot.
Make sure the Range Extender is powered on.
Move the Range Extender closer to the
telephone base and register it again.
•
•
The audio quality is
very poor or noisy when
receiving a call.
The signal connection is very poor. Try to
find another location where the signal to the
telephone base is better.
•
Calls lost or audio becomes
poor when moving from the
telephone base reception
range to the Range
Extender reception range.
You may be moving out of the telephone base
or Range Extender reception range, or are in
a blind spot. Move towards the telephone base
or Range Extender.
•
6Important Safety Instructions
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury,
including the following:
Read and understand all the instructions.
Follow all warnings and instructions marked on the product.
Unplug this product from the wall outlet before cleaning. Do not use
liquid or aerosol cleaners. Use a damp cloth for cleaning.
Do not use this product near water (for example, near a bathtub,
kitchen sink, swimming pool) or in humid areas.
Do not overload wall outlets and extension cords as this can result
in the risk of fire or electric shock.
Unplug this product from the wall outlet and refer servicing to VTech
under the following conditions:
When the power supply cord or plug is damaged or frayed.
If the product does not operate normally by following the
operating instructions.
If the product has been dropped and the cabinet has been
damaged.
If the product exhibits a distinct change in performance.
Do not place this product on an unstable cart, stand, or table. The
product can fall, causing serious damage to the unit.
To protect the product from overheating, do not block or cover any
slots or openings in the base unit. This product should never be placed
near or over a radiator or heat register. This product should not be
placed in a built-in installation unless the proper ventilation is provided.
This product should be operated only from the type of power source
indicated on the marking label.
Do not allow anything to rest on the power cord. Do not locate this
product where the cord will be damaged by people walking on it.
Never push objects of any kind into this product through the unit
slots, as they may touch dangerous voltage points or short-out parts
that could result in a risk of fire or electrical shock. Never spill liquid
of any kind on the product.
Use only the AC power adaptors supplied with this product.
For pluggable equipment, the socket-outlet shall be installed near
the equipment and shall be easily accessible.
1.
2.
3.
4.
5.
6.
•
•
•
•
8.
9.
10.
11.
12.
13.
14.
7Technical Specifications
Standards Digital Enhanced Cordless Telecommunication (DECT)
RF Frequency Band 1881.792–1897.344 MHz
Number of Channels 10
AC Adapter Output
Voltage
6VDC 450mA
AC Adapter (EU plug)
EU Adaptor:
Suppliers and Models
SHENZHEN RUIJING INDUSTRIAL CO. LTD.,
RJ-AS060450E002
VTECH TELECOMMUNICATIONS LTD.,
VT04EEU06045
AC Adapter (UK plug)
UK Adaptor:
Suppliers and Models
SHENZHEN RUIJING INDUSTRIAL CO. LTD.,
RJ-AS060450B001
VTECH TELECOMMUNICATIONS LTD.,
VT04EUK06045
Specifications are subject to change without notice.
© 2016 for VTECH TELECOMMUNICATIONS LTD.
All rights reserved. 08/16. VSP605A_QSG_V1.0.
8Disposal Warning
When this crossed-out wheeled bin symbol is attached to a
product, it means the product is covered by the European
Directive 2002/96/EC.
All electrical and electronic products/battery should be
disposed of separately from the municipal waste stream via
designated collection facilities appointed by the government or
the local authorities.
The correct disposal of your old appliance/battery will help
prevent potential negative consequences for the environment
and human health.
For more detailed information about disposal of your old appliance/
battery, please contact your city office, waste disposal service or the
shop where you purchased the product.
1.
2.
3.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VTech Phones VSP605A - Range Extender at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VTech Phones VSP605A - Range Extender in the language / languages: English as an attachment in your email.

The manual is 0.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info