Manual VTech DM1212 (page 1 of 2) (English)

809773

Zoom out

Zoom in

1/2

User’s guide

DM1212

Audio Baby Monitor When using your equipment, basic safety precautions

should always be followed to reduce the risk of ﬁre, electric

shock and injury, including the following:

1. Follow all warnings and instructions marked on the

product.

2. Adult setup is required.

3. This product is not a substitute for adult supervision of the

infant. Supervising the infant is the responsibility of the

parent or carer. This product could cease operating, and

therefore you should not assume it will continue working

properly for any given period of time. Further, this is not a

medical device and should not be used as such. This product

is intended to assist you in supervising your baby.

4. Do not use this product near water, for example, near to

a bath, sink, swimming pool or shower.

5. CAUTION: Use only the battery provided. There may be a risk

of explosion if a wrong type of battery is used for the parent

unit. The battery cannot be subjected to high or low extreme

temperature and low air pressure at high altitude during use,

storage or transportation. Disposal of battery into ﬁre or a hot

oven, or mechanically crushing or cutting or the battery can

result in an explosion. Leaving the battery in an extremely

high temperature surrounding environment can result in an

explosion or the leakage of ﬂammable liquid of gas. Battery

subjected to extremely low air pressure may result in an

explosion or the leakage of ﬂammable liquid or gas. Dispose

of used batteries according to the instructions.

6. Use only the adaptors included with this product.

Incorrect adaptor polarity or voltage can seriously

damage the product.

7. Use only adaptors and battery listed below.

Power adaptor information:

VTech Telecommunications Ltd.

Model : VT05EEU06040(EU),VT05EUK06040(UK)

Ten Pao Industrial Co.,Ltd.

Model: S003ATV06040(EU),S003ATB06040(UK)

Rechargeable battery information:

Corun - Ni-MH AAA750X2-K

Ni-MH AAA750mAh 2.4V

8. The power adaptors are intended to be correctly oriented

in a vertical or ﬂoor mount position. The prongs are not

designed to hold the plug in place if it is plugged into a

ceiling, under-the-table or cabinet outlet.

9. For pluggable equipment, the socket-outlet should

be installed near the equipment and should be easily

accessible.

10. Unplug this product from the wall outlet before cleaning.

Do not use liquid or aerosol cleaners. Use a damp cloth for

cleaning.

11. Unplug the power cords before replacing batteries.

12. Do not cut off the power adaptors to replace them with

other plugs, as this causes a hazardous situation.

13. Do not allow anything to rest on the power cords. Do

not install this product where the cords may be walked

on or crimped.

14. This product should be operated only from the type

of power source indicated on the marking label. If you

are not sure of the type of power supply in your home,

consult your dealer or local power company.

15. Do not overload wall outlets or use an extension cord.

16. Do not place this product on an unstable table, shelf,

stand or other unstable surfaces.

17. This product should not be placed in any area where

proper ventilation is not provided. Slots and openings

in the back or bottom of this product are provided

for ventilation. To protect them from overheating,

these openings must not be blocked by placing the

product on a soft surface such as a bed, sofa or rug.

This product should never be placed near or over a

radiator or heat source.

18. Never push objects of any kind into this product through

the slots because they may touch dangerous voltage

points or create a short circuit. Never spill liquid of any

kind on the product.

19. To reduce the risk of electric shock, do not disassemble

this product, but take it to an authorized service facility.

Opening or removing parts of the product other than

speciﬁed access doors may expose you to dangerous

voltages or other risks. Incorrect reassembling can cause

electric shock when the product is subsequently used.

20. You should test the sound reception every time you turn

on the units or move one of the components.

21. Periodically examine all components for damage.

22. There is a very low risk of privacy loss when using certain

electronic devices, such as baby monitors, cordless

telephones, etc. To protect your privacy, make sure the

product has never been used before purchase, reset

the baby monitor periodically by powering off and then

powering on the units, and power off the baby monitor

if you will not use it for some time.

23. Children should be supervised to ensure that they do not

play with the product.

24. The product is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety.

SAVE THESE INSTRUCTIONS

Cautions

1. Use and store the product at a temperature between

0oC and 40oC.

2. Do not expose the product to extreme cold, heat or direct

sunlight. Do not put the product close to a heating source.

3. Batteries should not be exposed to excessive

heat such as bright sunshine or ﬁre.

4. Warning—Strangulation Hazard—Children

have STRANGLED in cords. Keep this cord

out of the reach of children (more than 0.9m

away). Do not remove this tag.

5. Never place the baby unit inside the baby’s crib or

playpen. Never cover the baby unit or parent unit with

anything such as a towel or a blanket.

6. Other electronic products may cause interference with

your baby monitor. Try installing your baby monitor

as far away from these electronic devices as possible:

wireless routers, radios, cellular telephones, intercoms,

room monitors, televisions, personal computers, kitchen

appliances and cordless telephones.

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless

devices):

Wireless Technology Research, LLC (WTR), an independent

research entity, led a multidisciplinary evaluation of the

interference between portable wireless devices and

implanted cardiac pacemakers. Supported by the U.S.

Food and Drug Administration, WTR recommends to

physicians that:

Pacemaker patients

• Should keep wireless devices at least six inches from the

pacemaker.

• Should NOT place wireless devices directly over the

pacemaker, such as in a breast pocket, when it is turned

ON.

WTR’s evaluation did not identify any risk to bystanders

with pacemakers from other persons using wireless

devices.

Electromagnetic ﬁelds (EMF)

This VTech product complies with all standards regarding

electromagnetic ﬁelds (EMF). If handled properly and

according to the instructions in this user’s manual, the

product is safe to be used based on scientiﬁc evidence

available today.

Important safety instructions

Power on or off the baby monitor

Press to power on the baby unit. The power indicator light turns on.

Press and hold to power off the baby unit. The power indicator light turns off.

Press and hold to power on or off the parent unit.

4 Positioning the baby monitor

> 1metre

> 2 m

< 2 m

Basic operation - baby monitor

NOTESNOTE

Note

• To avoid interference from other electronic

devices, place your baby monitor at least 1

metre away from devices such as wireless

routers, microwaves, cell phones and

computers.

Caution

• The default volume of your parent

unit is level 3. If you experience

feedback from your baby monitor

while positioning:

- Make sure your baby unit and parent unit

are more than 2 metres apart, OR

- Turn down the volume of your parent unit.

> 2m

Adjust speaker volume

Press / to adjust your parent unit

speaker volume.

Talk to your baby unit

Press and hold on the side of the parent unit.

The screen displays the icon when the voice connection to the baby unit is

made.

Press and hold

What’s in the box

User’s guide

NOTESNOTE

• Use only the battery supplied with this product.

• If the parent unit will not be used for a long time, disconnect and remove the battery to prevent

possible leakage.

Install the parent unit battery

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

BT166342/BT266342 (2.4V 750mAh Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine CR1937

Connect the baby monitor

NOTESNOTE

• Use only the power adaptors supplied with this product.

• Make sure the baby monitor is not connected to a switch-controlled electric outlet.

• Connect the power adaptors in a vertical or ﬂoor mount position only. The adaptors’ prongs

are not designed to hold the weight of baby monitor, so do not connect them to any ceiling,

under-the-table, or cabinet outlets. Otherwise, the adaptors may not properly connect to the

outlets.

• Make sure the parent unit, the baby unit and the power adaptor cords are out of reach of

children.

• With audio reminder feature preset to ON, the parent unit plays an audio reminder when

it is connected to a baby unit.

Overview - Baby unit

810

1Starry projector light

2Microphone

3PAGE

• Press to start or stop paging parent

unit.

• Press to turn the night light on or off.

5 (On/off)

• Press to power on, and the power

light turns on.

• Press and hold to power off, and

the power light turns off.

6Power indicator light

• On when the baby unit is turned on.

7Night light

• On when night light is turned on

manually.

• Off when night light is turned off

manually.

8Speaker

9Temperature sensor

• Press to increase the speaker

volume.

• Press to decrease the speaker

volume.

11 Power jack

Connect and charge the battery

≥

< 1 m

1 m

﹏﹏﹏

﹏﹏﹏﹏﹏﹏

﹏﹏﹏﹏﹏﹏﹏﹏

﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏

﹏﹏﹏﹏﹏

﹏﹏﹏

﹏﹏﹏﹏

﹏﹏﹏﹏﹏

Nightlight

Press to turn on or off the nightlight.

3 Status check

Once you power on

both your baby unit and

parent unit, the parent

unit displays the current

room temperature, and

the baby unit’s power

indicator light turns on.

Caution

• Keep the baby unit out of the reach

of your baby. Never place or mount

the baby unit inside the baby’s cot or

playpen.

Speciﬁcations are subject to change without notice.

Technical speciﬁcations

Frequency control Crystal controlled PLL synthesizer

Transmit frequency Baby unit: 1881.792 - 1897.344MHz

Parent unit: 1881.792 - 1897.344MHz

Maximum power used by the transmitter: 0.25W (250mW)

Channels 10

LCD 35 (x) x 21.2 (y) mm B&W LCD

Nominal effective

range

Actual operating range may vary according to environmental

conditions at the time of use.

Power requirements Parent unit: 2.4V Ni-MH battery

Baby unit power adaptor:

Output: 6V DC @ 400mA

Parent unit power adaptor:

Output: 6V DC @ 400mA

Manufacturer: VTech Telecommunications Ltd.

23/F., Tai Ping Industrial Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong.

Importer: VTech Electronics Europe Plc.

Napier Court, Abingdon Science Park, Abingdon, Oxon, OX14 3YT.

> 1 metre

< 1 metre

> 2 metres

< 2 metres

> 2 metres

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of VTech DM1212 in the language / languages: English as an attachment in your email.

The manual is 7.93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of VTech DM1212

VTech DM1212 User Manual - German - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

VTech DM1212 Manual

Product: