540501

Vortex Diamondback Riflescope Manual

1
Zoom out
Zoom in
Previous page
1/4
Next page
Congratulations on your Diamondback Riflescope!
At Vortex, your love for the outdoors is the driving force behind all we do. Our commitment to you, our
customers and dealers, is unmatched in the industry—and is the strength of our success. From impressive
images to durable construction, our carefully designed and field-tested optics are the culmination of
an unwavering dedication to deliver quality, reliability and superior performance to you, our valued
customer.
Contents
Riflescope Diagram
Riflescope Adjustments
Riflescope Installation
Maintenance
Troubleshooting
Technical Service
Please read this entire manual
before mounting your rifl escope.
A
F
D
C
B
E
G
Vortex Diamondback Series Riflescopes
A. Fast Focus Ring
B. Magnification Ring
C. Eyepiece
D. Windage Dial
E. Elevation Dial
F. Objective Lens
G. Adjustable Objective (only on AO models)
Riflescope Adjustments
Vortex Diamondback series riflescopes use the exclusive
Fast Focus ring to get a clear and sharp reticle image.
To focus the reticle, begin by allowing your eyes to focus on a
distant object for several moments—not looking through the
scope. Then, hold the scope up to the sky and quickly look
through it. Never look directly into the sun! Pay attention to the
sharpness of the reticle, and adjust the eyepiece focus until it is
as sharp as possible. The reticle image should be crisp and sharp
immediately when you look. Since your eyesight may change over
time, it’s a good idea to periodically re-check this adjustment.
Rifl escopes are not intended for looking at the sun or any other intense light
source. Such use could damage the retina and cornea of your eyes—even to the
point of causing blindness.
Caution!
1. Reticle Focusing
2. Windage and Elevation Adjustment
After sight-in, you can re-align the zero marks on the dials with
the reference dots if you wish (see page 15). Replace covers when
done.
Vortex Diamondback riflescopes incorporate adjustable elevation
and windage dials with audible clicks. Each audible click moves the
bullet’s point-of-impact a fraction of a minute of angle (MOA).
• 1/4 MOA closely corresponds to 1/4 inch at 100 yards, 1/2 inch
at 200 yards, 3/4 inch at 300 yards...taking four (4) clicks to move
the bullet’s point-of-impact one inch at 100 yards.
Begin adjusting the windage and elevation settings by first
removing the covers. Then, move the dials in the direction
you wish the bullet’s point-of-impact to change. To make the
adjustments, turn the adjustment dial in the appropriate direction
(up/down or left/right) as indicated by the arrows.
How to Adjust Windage and Elevation Settings
www.vortexoptics.com
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vortex Diamondback Riflescope at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vortex Diamondback Riflescope in the language / languages: English as an attachment in your email.

The manual is 0,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info