540503

Vortex Crossfire Riflescope Manual

1
Zoom out
Zoom in
Previous page
1/4
Next page
Congratulations on your Crossfire!
At Vortex, your love for the outdoors is the driving force behind
all we do. Our commitment to you, our customers and dealers,
is unmatched in the industry—and is the strength of our success.
From impressive images to durable construction, our carefully
designed and field-tested optics are the culmination of an
unwavering dedication to deliver quality, reliability and superior
performance to you, our valued customer.
Please read this entire manual before mounting your rifl escope.
A
F
D
B
E
C
G
H
Vortex Crossfire Series Riflescopes
A. Fast Focus Ring
B. Magnification Ring
C. Eyepiece
D. Windage Dial
E. Elevation Dial
F. Objective Lens
G. Illuminated Reticle Knob (on select models)
H. Adjustable Objective (AO models only)
Riflescope Adjustments
To set the reticle focus, begin by allowing your eyes to focus on
a distant object for several moments—not looking through the
scope. Then, hold the scope up to the sky and quickly look through
it. Never look directly into the sun! Pay attention to the sharpness
of the reticle, and adjust the eyepiece focus until it is as sharp as
possible. The reticle image should be crisp and sharp immediately
when you look. Since your eyesight may change over time, it’s a
good idea to periodically re-check this adjustment.
Rifl escopes are not intended for looking at the sun or any other intense light
source. Such use could damage the retina and cornea of your eyes—even to the
point of causing blindness.
Caution!
1. Reticle Focusing
Vortex Crossfire riflescopes incorporate fingertip-adjustable
elevation and windage dials with tactile and audible clicks. Each
audible click moves the bullet’s point-of-impact a fraction of
a minute of angle (MOA)—either 1/4 or 1/8 MOA. Refer to
markings on the inner turret knob for click movement.
2. Windage and Elevation Adjustment
• 1/4 MOA* closely corresponds to 1/4 inch at 100 yards, 1/2 inch
at 200 yards, 3/4 inch at 300 yards...taking four (4) clicks to move
the bullet’s point-of-impact one inch at 100 yards.
• 1/8 MOA* closely corresponds to 1/8 inch at 100 yards, 1/4 inch
at 200 yards, 3/8 inch at 300 yards...taking eight clicks to move the
bullet’s point-of-impact one inch at 100 yards.
Begin adjusting the windage and elevation settings by first
removing the outer covers. Folowing the indicator arrows, move
the turret dials in the direction you wish the bullet’s point-of-
impact to change. To make the adjustments, turn the adjustment
dial in the appropriate direction (up/down or left/right) as
indicated by the arrows.
Some Crossfire adjustable objective (AO) models use tall target
turrets for improved adjustability of windage and elevation. These
turrets will also allow you to re-index the zero indicator after
sight-in—without disturbing your settings. This very handy
Tall Target Turret Models
How to Adjust Windage and Elevation Settings
feature allows you to return quickly to your original zero if
temporary corrections are used in the field.
www.vortexoptics.com
1. After final sight-in is complete,
remove the inner turret knob by
loosening the three small screws
located on top of the turret with a
1.5mm hex wrench.
2. Carefully rotate the outer dial until
the zero mark is re-aligned with the
indicator line.
3. Re-tighten the small screws.
Loosen
the 3
screws.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vortex Crossfire Riflescope at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vortex Crossfire Riflescope in the language / languages: English as an attachment in your email.

The manual is 0,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info