738293

Voltcraft PM-40 Manual

4
Zoom out
Zoom in
Previous page
1/8
Next page

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.

G

• If the US power meter shows a voltage low 4.8 V, then in general the current required by
the connected USB device (a smartphone for example) is too high. If this is the case, use
e.g., a USB power adapter with a higher output current. Furthermore, preferably use a
thicker and shorter USB cable, if possible, if the current values are high.
• If no indicator appears on the USB power meter’s display, then the USB power meter is in
power saving mode. Press button “4” briey to switch on the display.
• If data is supposed to be transferred, you have to select operating mode “D” by using the
sliding switch (3). This facilitates the USB2.0 / 1.1 connection.
• Always use the sliding switch (3) to select the correct setting (see chapter “Operation”), if an
Apple device or Android device needs to be charged.
Otherwise the charging current will be much lower.

The product does not require any maintenance and should never be disassembled for any
reason.
Clean the product carefully, e.g., with a soft, clean cloth.
Never use aggressive cleaning agents or chemicals for cleaning; these can lead not only to
discolouration, but can also damage the product.

The product must not be disposed of with the household waste.
Please dispose of the product at the end of its service life according to the current
statutory requirements.

Power supply ........................................via USB
Internal current consumption ............... approx. 8 mA (in power saving mode with the display
switched off aprox. 5 mA)
Measurement range .............................Voltage: 3.5 - 5.8 V/DC
..............................................................Current: 0.03 A - 3 A
Resolution .............................................Voltage: 10 mV
..............................................................Current: 10 mA
Connected load ....................................max. 15 W (5 V/DC x 3 A)
Ambient conditions ............................... Temperature 0 °C to +70 °C; humidity 0% to 80%,
non-condensing
Dimensions ...........................................44 x 19 x 19 mm (L x W x H)
Weight ..................................................9 g
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voltcraft PM-40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voltcraft PM-40 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info