Manual Vivotek ST2403 Software (page 27 of 29) (English)

520754

Zoom out

Zoom in

1/29

4-3-4 Image Display Area: Display the real-time image of the camera selected.

4-3-5 Motion Detect: Recording will start when motions are detected. The sensitivity level must be

set.

4-3-5-1 Sensitivity Level: Drag the indicator between the sensitivity level from 1 to 10. The

sensitivity value will be shown on the left of the bar. The higher the

value, the higher the sensitivity will be.

4-3-5-2 Click【Apply to All Cameras】to apply the motion detect settings to all cameras. When

an event which meets the motion detect conditions occurs, recording will be started,

and an M sign will appear on the upper-left corner of the display area.

4-4 Scheduling

Set the recording schedules and contents.

4-4-1 Weekly Schedule: Use mouse to direct pull on the day/hour time stamp to be adjusted for the

starting or ending day/hour weekly.

4-4-2 Dedicated Schedule: Decide to dedicate recording schedule. Attention: the start time must

be earlier than the end time, or a “double settings for the time period” message will

appear on the screen. Each day starts at 00:00 and ends at 23:59.

4-4-3 Events: There are two recording modes including round-the-clock and motion detect. Only one

recording mode can be chosen.

4-4-4 Enable Camera/Device: Select cameras/ for the schedule job.

4-4-1 4-4-2

4-4-3 4-4-4

4-4-5

4-4-6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vivotek ST2403 Software in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vivotek ST2403 Software Manual

Product: