519785
7
Zoom out
Zoom in
Previous page
1/9
Next page
EN - 6
WPS
WPS
1. Make sure your AP (Access Point) and Operating System support WPS (Wi-Fi Protected
Setup) functions. WPS enables easy setup with compatible APs.
2. Disconnect your LAN cable, and connect the power cord.
3. Wait for 1 minute for the camera to boot up. Press the WPS button for 1 second. The
front panel LED should blink blue.
4. Press and hold down the WPS button on your AP (some router/AP
will have a virtual button on their management software instead).
Refer to your AP's documentation for details using its WPS
functions.
When WPS conguration is done, wireless connectivity will be established and the
security encryption, such as WEP or WPA-PSK, will be synchronized with the AP.
Use the IW2 utility to nd the camera. As for IP setting, the camera's use of DHCP or
static IP is determined by your conguration on the network camera via the web-based
conguration of rmware. The camera's default is DHCP.
NOTE:
WPS Button
WPS Button
Wireless AP
1. It is strongly recommended to apply WPA2/AES encryption for access security.
2. WPS may not work if your AP is congured with a "hidden" SSID.
3. If no WPS-enabled AP is detected, and if the camera still can not detect an AP after 2
minutes, the wireless setup will be cancelled. If WPS conguration should fail, wireless
conguration will be cleared. You can then re-try the process above or use a wired
connection to establish a web console and manually congure the wireless settings.
4. If a camera is assigned with a xed IP outside the AP's network segment, wireless setup
will fail.
5. A wired connection always has a higher priority, and hence wireless setup will not take
effect when the RJ45 LAN port is connected.
Wireless Connection: Using the WPS Button
7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vivotek IP8130 Fixed at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vivotek IP8130 Fixed in the language / languages: English as an attachment in your email.

The manual is 3,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vivotek IP8130 Fixed

Vivotek IP8130 Fixed User Manual - English - 196 pages

Vivotek IP8130 Fixed Quick start guide - German - 9 pages

Vivotek IP8130 Fixed Quick start guide - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info