610000
14
Zoom out
Zoom in
Previous page
1/16
Next page
14
Non Submerged pump: (Page 3, Figure 4 and 5)
- Place the pump outside the pond or reservoir below the water level and water flow
towards the pump itself (the pump is not self-priming).
- Install a hose at least 40 mm in diameter and up to 1.5 m max. (Z) and pressure hose
(P).
- Before putting into operation the suction hose (Z) must be completely filled with
water.
- NOTE: To protect the pump from contamination, put on the suction side a pre-filter.
- NOTE: It will be not possible for fish or other animals to get in the suction line, use a
grating or filter
Overload protection:
The built-in safety stops the pump in case of overheating. Unplug the appliance and let it
cool. The pump must not be turned back on after uncontrolled cooling.
First check the following points:
- Is there enough water available?
- Is the filter clogged?
- Is there dirt in the pump?
- Are hoses or nozzles clogged?
- Is the pump cool down?
Are the issues solved, you can run the pump.
Maintenance
To ensure a long life and problem-free operation, we recommend that you maintain and
clean your pump regularly.
- Follow the safety instructions.
- Pump maintenance depends strongly on the level of water contamination. Regularly
check the filter cap for clogging to prevent the pump from sucking water.
- Turn the pump off before taking it out of the water for maintenance.
- Clean the filter cap and remove all debris from its slots.
- Remove the filter cap from the pump to open the motor housing, by turning the
screws out.
-
Get the impellor out from the motor. Pay attention to the o-ring which sits on the
motor housing.
- Clean all parts with clean water.
- Replace the defective parts. (page 11)
- Place the impellor back into the motor and close the motor housing.
Important! When there is a lot of calcium in the water, it is important to clean the split tube
and impellor in the motor regularly.
In the winter
- Protect the pump from frost.
- Take the pump out of the water before the frost season sets in.
- Clean the pump as described earlier, before putting it in storage.
- Store it in a dry and frost-free area.
English
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vivaria VarioTec N-10000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vivaria VarioTec N-10000 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info