Manual Vivanco ur s2 (page 2 of 34) (English, German, Dutch, French, Italian, Polish, Spanish)

122731

Zoom out

Zoom in

1/34

UR S2 UNIVERSAL TV- DVB CONTROLLER

Vivanco GmbH, D-22926 Ahrensburg, E-Mail

: hotline@vivanco.de

Code search

If the brand of your appliance is not in

the list or none of the codes given fits,

we recommend a code search.

Manual code search

1. Switch on the appliance to

be controlled. Program is running.

2. To prepare code search,

press the SET button, keep it pressed

and then press the required appliance

button, e.g. TV, additionally until the

lamp (LED) lights constantly.

3. Then point the remote

control at the appliance to be

controlled.

4. Briefly press the SET

button once. The lamp (LED) blinks.

5. Press the ON/OFF

(appliance on/off) button repeatedly

for testing the next code, approx.

every 1,5 seconds, until the appliance,

e.g. your TV reacts by power off.

- If your appliance has switched itself

off you must switch it back on again,

e.g. on the appliance or with the

original remote control, to continue

searching. - When your appliance

reacts you can also try out other

buttons without interrupting the

search. If some buttons do not work

properly, simply continue searching

with ON/OFF.

6. When your appliance

reacts correctly, press the appliance

button, e.g. TV, and end the search.

The lamp (LED) goes out.

- The UR S2 continues with the search

at the point where you interrupted it. .

The code last entered remains stored.

The search stops after approx. 30

seconds of inactivity.

Automatic code search

Your remote control finds the correct

settings almost automatically in

seconds:

1. Switch on the appliance to

be controlled. A channel number, for

example, appears in the display of

your satellite receiver.

2. To start the code search,

press the required appliance button,

e.g. DVB briefly.

3. Then press SET for about

5 seconds until the lamp (LED) starts

to blink.

4. Then point the remote

control at the appliance to be

controlled while the remote control

emits a different ON/OFF signal every

second.

5. When your appliance

reacts, press SET within 1-2 seconds,

to end the search. – If you ended the

search too late, continue to search

using the Manual Code Search (see

above).

6. Finally, test the control

code setting by trying to control, for

example, your DVB appliance. If it

does not work correctly, please try the

code search again. The code search

then begins with the next code in the

sequence. - Remember to switch your

appliance, e.g. DVB, back on again if

you wish to continue searching.

Code identification

You can read off the 3-digit codes you

have set at any time:

1. Press the appliance button

of the appliance which code you want

to read off, e.g. TV.

2. Press the SET button and

1,2,3, depending on the part of the

code you want to read off. For

example, if you press SET+1 after TV

and the code 176 (in this example)

has been set, the lamp blinks once

after SET+1 is released to show that

the hundred figure is 1. All

you have to do is count. The ten figure

is indicated after SET+2 is released,

e.g. it blinks 7 times for the 7 in 176.

The one figure is indicated after

SET+3 is released, e.g. it blinks 6

times for the 6 in 176.

- Please open the battery

compartment and write down the

found codes, for later use, onto the

sticker placed at the innerside of the

compartment door.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vivanco ur s2 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vivanco ur s2 Manual

Product: