122580
2
Zoom out
Zoom in
Previous page
1/25
Next page
UR 89 Universal Controller
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, e-Mail: hotline@vivanco.de 2
1. Switch on the appliance to be controlled.
A channel number, for example, appears in the
display of your satellite receiver.
2. To start the code search, press the SET
button, bottom right, and then additionally the
required appliance button, e.g. TV, for more
than 3 seconds until the lamp (LED) starts to
blink.
3. Then point the remote control at the
appliance to be controlled while the remote
control emits a different ON/OFF signal every 2
seconds.
4. When your appliance reacts, press any
button, except SET, to end the search. If you
ended the search too late, continue to search
using the Manual Code Search (see above).
5. Finally, test the control code setting by
trying to control, for example, your DVD
appliance. If it does not work correctly, please
try the code search again. The code search
then begins with the next code in the sequence.
- Remember to switch your appliance, e.g.
DVD, back on again if you wish to continue
searching.
Code identification
You can read off the 3-digit codes you have set
at any time:
1. Press the appliance button of the
appliance whose code you want to read off, e.g.
TV.
2. Press the SET button and 1,2,3,
depending on the part of the code you want to
read off. For example, if you press SET+1 after
TV and the code 154 (in this example) has
been set, the lamp blinks once after SET+1 is
released to show that the hundred figure is 1.
All you have to do is count. The ten figure is
indicated after SET+2 is released, e.g. it blinks
5 times for the 5 in 154. The one figure is
indicated after SET+3 is released, e.g. it blinks
4 times for the 4 in 154. - We recommend that
you note the found codes, for example, on a
label attached to the back of the remote control.
Operation
You operate your appliances basically in
exactly the same way as if you were using the
original remote controls, except that you must
first press an appliance button (TV, DVD, etc.)
to control the required appliance. As the
symbols on the UR 89 could differ from those
on the original remote controls you may have to
try out all the buttons in order to find the
functions.
Special settings and functions
1. Volume Punch-Through function: To
simplify operation, the volume buttons (VOL+ or
VOL-) and the Mute
button always control
the last appliance used for volume control if the
appliance currently selected does not have
volume control in its control code. Example:
you are controlling TV at first, then you change
to DVD, which has no volume control. The
remote control then automatically controls the
TV volume without you having to switch over to
TV in between.
2. Assigning volume and mute
exclusively to one appliance: Press the
appliance button of the appliance that you
always want to use for volume control, e.g.
AMP if that is where you have set your AV
receiver. To lock, press SET and 5. To unlock,
press SET and 6.
Specifications
Batteries: 2x AAA batteries, R03, UM4
Range: max. 7 m
Not for 400 kHz equipment
2-year works guarantee
Should your UR 89 cease to work within 2
years of purchasing you will receive a free
replacement from Vivanco. Exceptions: missing
codes, deliberate destruction and normal wear
and tear of the housing and buttons.
(D) Bedienungsanleitung
Fernbedienung Vivanco UR 89 für fast alle
Fernseh-, Audio-, Video und anderen
infrarotsteuerbaren Geräte
Batterien einlegen
Bitte öffnen Sie die Batterieklappe an der
Geräterückseite, Lasche leicht nach oben
drücken, und legen Sie 2 Alkali-
Mikrozellenbatterien ein. Achten Sie auf die
angegebenen Polaritäten auf Batterien und im
Batteriefach (+=+), und schließen Sie das Fach
wieder vorsichtig. Bitte achten Sie darauf,
immer einwandfreie Batterien zu verwenden.
Geräteanpassung
Um Ihre Geräte steuern zu können, müssen Sie
die Fernbedienung für Ihre Geräte einstellen.
Dazu gibt es zwei Möglichkeiten: die direkte
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vivanco ur 89 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vivanco ur 89 in the language / languages: English, German as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vivanco ur 89

Vivanco ur 89 User Manual - English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info