Manual Vivanco ur 2400 (page 4 of 88) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

122855

Zoom out

Zoom in

1/88

of the code you want to read off.

For example, if you press +1 and the set

code is e.g. 1234, the lamp blinks once after

+1 is pressed to indicate that the thousends

figure is 1. All you have to do is to count. The

hundreds figure is indicated after pressing

+2, e.g. it blinks 2 times for the 2 in 1234. The

tens figure is indicated after +3 is pressed,

e.g. it blinks 3 times for the 3 in 1234. The

unit figure is indicated after +4 is pressed,

e.g. it blinks 4 times for the 4 in 1234.

- There will be no flash in case of 0 indication..

Learning of Missing Control Functions

(UR 2400 only)

The LEARN function is used to supplement the

preprogrammed codes. The standard code may

provide most of functions needed, but you may

miss some button functions. Or you didn´t find

any functioning preprogrammed code for a

device. You can capture upto 206 button func-

tion codes, max. 40 per device. The last cap-

tured function will overwrite the previous. learnt.

1 For learning of button codes you must use a

functioning original remote controller. Please

use fresh batteries for both remote controls.

2 Please point the original remote control trans-

mitter LED towards the receiver LED of UR

2400 (placed on top, same as transmitter

LED). Distance of LEDs between both re-

motes shall be approximately 1-2 cm and

must be in straight line of sight.

– Sometimes you have to move the remotes a

bit too and fro while learning, in order to find

right positions.

3 Press the LEARN button for about 3 seconds

until the LED (lamp) turns on.

4 Press SELECT button to select to be con-

trolled device as often until TV LED is on.

5 Press and release the target button on the

UR 2400, that you want to learn (reprogram)

(e.g. POWER), the LED starts flashing.

6 Press and hold the source button on the ori-

ginal remote control (e.g. POWER) until the

LED on your UR 2400 remote control stops

flashing and changes to on again. That indic-

ates that a new function code, e.g. POWER,

has been learnt.

7 Repeat steps 5 to 6 for capturing more button

functions.

8 Press and release LEARN button for exit of

learning mode.

– The controller will exit the learning mode auto-

matically after about 10 seconds of inactivity.

- Memory full indication: If the memory is full,

the LED flashes 2 times and then a pro-

grammed button can be overwritten.

Reset/deletion of a single learnt button func-

tion

1 Press LEARN button and then 1 button simul-

taneously until a device lamp (LED) lights

constantly.

2 Press SELECT button to select device, which

belongs to the to be deleted button function

as often until e.g. TV LED is on.

Vivanco GmbH, D-22926 Ahrensburg, E-Mail: hotline@vivanco.de, Helpline: +49 (0) 4102 231135

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vivanco ur 2400 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vivanco ur 2400 Manual

Product: