122853

Vivanco ur 1250 Manual

3
Zoom out
Zoom in
Previous page
1/47
Next page
Manual code search
1. Switch on the appliance to
be controlled. Program is run-
ning.
2. To prepare code search,
press the OK button and the
appliance button, e.g. TV, sim-
ultaneously until the lamp
(LED) lights constantly.
3. Then point the remote con-
trol at the appliance to be con-
trolled.
4. Briefly press the ON/OFF
POWER button once. The
lamp (LED) blinks.
5. Press the ON/OFF
POWER button about any 1
second so often until the appli-
ance, e.g. your TV reacts by
power off.
- You can invert search direc-
tion by pressing the OK button
and then POWER again.
- If your appliance has
switched itself off, you must
switch it back on again, e.g.
on the appliance or with the
original remote control, to
continue searching.
- When your appliance reacts you can also try out other
buttons without interrupting the search. If some buttons
do not work properly, simply continue searching by
pressing ON/OFF POWER again.
6. When your appliance reacts correctly, press
the appliance button, e.g. TV for end of searching and
saving of found code. The lamp (LED) goes out.
- The last code entered remains stored. The search
stops after approx. 30 seconds of inactivity.
Automatic code search
1. Switch on the appliance to
be controlled. Program is run-
ning.
2. To start the code search,
press the OK button and the
appliance button, e.g. TV,
simultaneously for more than
3 seconds until the lamp
(LED) goes off briefly.
3. Then point the remote
control at the appliance to be
controlled while the remote
control emits a different
ON/OFF signal every 1-2
seconds.
- You can reverse search dir-
ection at any time by pressing
OK button.
4. When your appliance re-
acts, press any button except
OK within 1-2 seconds, to
end the search and save
code..
– If you ended the search too
late, continue to search using
the Manual Code Search
(see above).
5. Finally, test the control code setting by trying
to control, for example, your DVD appliance (UR 1300
only). If it does not work correctly, please try the code
search again. The code search then begins with the
found code in the sequence.
- Remember to switch your appliance, e.g. DVD, back
on again if you wish to continue searching.
Vivanco GmbH, D-22926 Ahrensburg, E-Mail: hotline@vivanco.de, Helpline: +49 (0) 4102 231135
3
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vivanco ur 1250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vivanco ur 1250 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info