122852
3
Zoom out
Zoom in
Previous page
1/36
Next page
and code input can be started again.
8. Then test the control code setting by trying to
control (in this example) your television set. If
it does not work at all or not correctly try a dif-
ferent code from the list or code search (see
below).
9. To make the setting for a DVB (SAT, CBL), re-
ceiver or a cable box, press the SAT/DVB
(SAT, CBL) button instead of TV and enter a
DVB (SAT, CBL) code accordingly.
- You terminate the mode by pressing any
device button or by code input interruption of
more than 10 seconds.
Code search
If the brand of your appliance is not in the list or
none of the codes given fits, we recommend a
code search.
Manual code search
1. Switch on the appliance to be controlled. Pro-
gram is running.
2. To prepare code search, press the OK button
and the appliance button, e.g. TV, simultan-
eously until the lamp (LED) lights constantly.
3. Then point the remote control at the appli-
ance to be controlled.
4. Briefly press the ON/OFF button once.
The lamp (LED) blinks.
5. Press the ON/OFF button about any 1
second so often until the appliance, e.g. your
TV reacts by power off.
- You can invert search direction by pressing
the OK button and then again.
- If your appliance has switched itself off, you
must switch it back on again, e.g. on the appli-
ance or with the original remote control, to con-
tinue searching.
- When your appliance reacts you can also try
out other buttons without interrupting the
search. If some buttons do not work properly,
simply continue searching by pressing ON/OFF
again.
6. When your appli-
ance reacts cor-
rectly, press the ap-
pliance button, e.g.
TV for end of
searching and sav-
ing of found code.
The lamp (LED)
goes out.
- The last code
entered remains
stored. The search
stops after approx. 30
seconds of inactivity.
Automatic code
search
1. Switch on the appli-
ance to be con-
trolled. Program is
running.
2. To start the code
search, press the
OK button and the
Vivanco GmbH, D-22926 Ahrensburg, E-Mail: hotline@vivanco.de, Helpline: +49 (0) 4102 231135
3
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vivanco ur 1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vivanco ur 1200 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info