615920
7
Zoom out
Zoom in
Previous page
1/8
Next page
vision semi touch
advanced car entertainment
7
Powered by: Vision Electronics
TÜV
TÜV Rheinland/
Berlin-Brandenburg
Geprüft nach ECE-R17/R21
Bericht: 13-SG03xx
1. Touch button voor bronkeuze AV1 of AV2
2. Touch button voor menu beeldscherminstellin-
gen: Helderheid, Contrast, beeldformaat 16:9/4:3,
Beeldrotatie, Taalkeuze, IR selectie audio (kanaal 1/2).
3. Touch button aan-/uitschakeling
4/5. Verhogen/verlagen beeldscherminstellingen
Note:
If the DVD/CD is dirty, the audio and/or the image can
fall out temporary. For optimum picture and sound
quality, you should note het following:
Only grab the DVD/CD on the sides. Don’t touch
the side without inscription and make sure it stays
clean.
Do not attach anything on the DVD/CD.
Protect the DVD/CD from strong sunlight and
heat sources, such as heating etc.
Clean the DVD/CD before you play with a com-
mercially available cleaning cloth, sweep from the
centre to the outer edge. Don’t use any solvents
such as benzene, thinner or other detergents and
anti-static spays.
Do not bend the DVD/CD.
Accepted formats
DVD, MP4, VCD, MP3, WMA, JPEG, CD, CD-R, CD-RW.
Follow these instructions to avoid problems playing
mp3 CDs
• Black disks of 650 MB and 700 MB are supported.
The following CD-formats are supported: CD-ROM
Mode 1/ISO 9660 Level 1/Joliet.
Joliet formats (file name max 64 characters) are pos-
sible
If quality problems occur with home-burned DVD/
CD’s, DVDs/CD’s with a different format, Mixed mode
CD, CD extra discs as well multi session DVD/CD or
finalized DVD/CD. No liability is accepted.
Cleaning monitor surface
Clean the monitor surface with a commercially availa-
ble cleaning cloth. Don’t use any solvents such as ben-
zene, thinner or other detergents and anti-static spays.
7. External sources
On the Vision console system an external audio/video
source, such as an iPod™, can be connected. Therefore
are RCD Jacks (Yellow, red and white) are needed:
The AUX2 connector is located in the storage bag from
the passenger seat.
Note:
Effect on seat adjustment/ weight sensor*, airbag func-
tion and/or damage to cables
Laying cables for an external source to the external
audio-/video source must be performed by an authori-
zed workshop. *Country-specific implementation.
8. Troubleshooting
No sound and/or image:
Check (with the remote) if the base volume is set
to default state of the volume or mute is activated.
Make sure the headset is on.
The LED on the headset should be on. If the LED
even after pressing the power button on the headp-
hones remains off, the potteries are empty or not
seated correctly.
Check the setting of the audio channel (A/B)
Passenger side: Channel A, Drivers side: Channel B.
They have to be corresponding with the monitor.
A=IR1 B=IR2 see page 3/6
Check with a different DVD/CD if the sound remains
damaged. Check at an external AV-source the con-
necting cable.
Image-/sound disturbances.
In the immediate vicinity of broadcast towers the
system may experience some disturbance.
Restart the vision system
Note:
The image-/sound quality depends on the quality of
the DVD/CD.
Remote control does not work.
Check that the infrared remote receiver is not
covered.
Replace the batteries.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vision Electronics Vision semi touch - VSTHL 10-0212 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vision Electronics Vision semi touch - VSTHL 10-0212 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vision Electronics Vision semi touch - VSTHL 10-0212

Vision Electronics Vision semi touch - VSTHL 10-0212 User Manual - English - 8 pages

Vision Electronics Vision semi touch - VSTHL 10-0212 User Manual - German - 8 pages

Vision Electronics Vision semi touch - VSTHL 10-0212 User Manual - Dutch - 8 pages

Vision Electronics Vision semi touch - VSTHL 10-0212 User Manual - Dutch - 8 pages

Vision Electronics Vision semi touch - VSTHL 10-0212 User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info