667285
3
Zoom out
Zoom in
Previous page
1/8
Next page
Technical Information 15.01
- Page 3 -
3. Cutting height adjustment
The new MB 410 and MB 415 lawnmowers feature
separate cutting height adjustment for the front and
rear axles.
The adjustment lever for front axle height adjust-
ment is located next to the left front wheel.
The adjustment lever for rear axle height adjustment
is located next to the left rear wheel.
4. Engine oil and fuel
Top up engine oil before initial start (oil dipstick).
Please consult the engine instruction manual for the
grade of engine oil to be used and the filling
quantity.
Note:
VIKING HD 15W-40 and VIKING SAE 30 are two
high quality motor oils specially formulated for use
in small four-stroke engines.
Checking engine oil
Check engine oil level at regular intervals.The oil
level must be within the marked field on the dipstick.
Screw the dipstick in fully to measure the level.
Fuel
Recommendation: Fresh good quality fuel, normal
unleaded petrol.
There are 7 cutting height adjustment settings
ranging from 25 to 70 mm.
Cutting levels 2 to 6 are standard.
Level 1 = lowest cutting height
Level 7 = highest cutting height
The engine must be switched off before adjusting
the cutting height.
Height adjustment:
First, push adjustment lever in direction of the wheel
and then allow to engage in the desired position
(= cutting height).
The cutting height indicators are located immediate-
ly next to the adjustment levers, on the housing or
on the catcher bag.
The cutting height settings on the front and rear
axles should be identical. Different cutting heights
result in a reduced collecting performance.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viking MB 410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viking MB 410 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info