652048
9
Zoom out
Zoom in
Previous page
1/12
Next page
9
Fig. 5Abb. 5
Universal Ein-Aus-Umschalter
10 kΩ
10 kΩ
14 – 16 V ~ AC
8
7
9
6
5
4
3
2
1
14
13
12
11
10
Aufenthaltsschalter 5208
Viessmann
Maximale Betriebsspannung 16 V ~/=
an Buchsen 1 und 2
Vor Inbetriebnahme unbedingt
die Betriebsanleitung lesen!
Kriech-
geschwindigkeit
Aufenthaltszeit
Bremsen
Anfahren
viessmann
5550
blau
blue
blau blue
gelb
yellow
braun brown
schwarz
black
braun
brown
S2 S2 S1S1
de müssen unbedingt eingebaut werden, da sonst
das Gerät zerstört wird! S2 verbinden Sie mit einem
Pol der Wechselstrom-Versorgung des Aufenthalts-
schalters (Buchse 1 oder 2). Mit den Schaltern S1
und S2 wählen Sie nun die zusätzlichen Betriebs-
arten des Aufenthaltsschalters:
Beide Schalter aus:
Vollautomatikbetrieb (auch ohne Schalter): Der
Zug bremst, wartet und beschleunigt wieder vollau-
tomatisch, ohne dass Sie eingreifen müssen.
Schalter S1 ein, S2 aus: Halbautomatikbetrieb:
Der Zug bremst automatisch im Bahnhof ab und
bleibt stehen. Damit er wieder losfährt, müssen Sie
den Schalter S2 kurzzeitig einschalten. Jetzt fährt
der Zug wieder los und beschleunigt auf seine Stre-
ckengeschwindigkeit. Schalter S2 können Sie auch
durch ein Schaltgleis oder einen Reedkontakt erset-
zen, der von einem anderen Zug betätigt wird und
dadurch eine abgestimmte Ausfahrt des wartenden
Zuges auslöst. So realisieren Sie ohne viel Aufwand
einen automatischen Zugwechsel.
Beide Schalter ein:
Durchfahrt: In dieser Schalterstellung fahren alle
Züge einfach durch. Ein Beispiel, wie Sie dafür sor-
gen, dass nur bestimmte Züge durchfahren, finden
Sie im nächsten Abschnitt.
Eine Änderung der Schalterstellung wird erst dann
wirksam und angezeigt, wenn der 5208 weder
bremst, wartet oder beschleunigt. Die Reaktion der
LEDs auf ein Umstellen des Schalters kann also bis
über 1 Minute dauern.
8. Freie Fahrt für Güterzüge und
ICEs
In einem kleineren Bahnhof halten nicht alle Züge.
Während Personenzüge und S-Bahnen anhalten,
fahren Güterzüge und ICEs in diesen Bahnhöfen
Both switches off:
Fully automatic operation (also without
switches):
the train slows down, stops and waits before de-
parting without any manual control.
Switch S1 on, S2 off: semi-automatic opera
-
tion:
the train automatically slows down and stops at
the station. Press S2 briefly to let the train depart.
S2 could also be replaced by a track contact or
reed contact that is activated by another train thus
achieving a controlled departure of the waiting train
subject to other train movements. In other words:
automatic change of trains!
Both switches on:
Through operation: all trains move through the
sectors without stopping. Below you will find an
example of how to selectively allow trains to pass
through.
Activating a switch will only have an effect when
the 5208 is not active (e.g. no train movement
within the sectors). Thus the response of the LED
indication may take up to one minute.
8. Through travel of express and
freight trains
Usually not all trains stop at a small station. Pas-
senger trains or commuter trains stop while freight
trains or express trains continue without stop
-
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann 5208 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann 5208 in the language / languages: English, German as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info