652076
13
Zoom out
Zoom in
Previous page
1/16
Next page
13
Mot. / DCC
4554
gelb
braun
Digitalzentrale
braun
/ yellow
brown
Digital Command Station
brown
Fig. 14
Abb. 14
1. Schalten Sie das Digitalsystem aus, z. B. Not-Aus.
Es darf keine Spannung mehr am Gleis anliegen.
2. Verbinden Sie nur die rot markierte Steuerleitung
und die Stromversorgungsleitungen des Weichenan-
triebs (braun und gelb, s. Abb. 15) mit dem Gleis.
3. Schalten Sie das Digitalsystem ein.
4. Verbinden Sie die zweite (grün markierte) Steuer-
leitung gleichfalls mit dem Gleis (s. Abb. 14).
5. Senden Sie mit der Digitalzentrale nun für die
gewünschte DCC-Adresse einen Schaltbefehl.
Der Weichenantrieb empfängt den Befehl, registriert
die Adresse und quittiert dies durch Umschalten.
Damit ist der Weichenantrieb unter der neuen Adres-
se betriebsbereit. Falls Sie die Adresse künftig ändern
möchten, wiederholen Sie die Prozedur einfach.
CV-Programmierung:
Sie können den Weichenantrieb in DCC auch direkt über
dasHauptgleis(POM=Programmingonthemain)kon-
gurieren, sofern Ihre Digitalzentrale diese Funktion unter-
stützt. Dazu sendet die Zentrale per POM an die bekann-
te Decoderadresse die neuen Daten für die CVs 1 und 9.
Beachten Sie die Anleitung zu Ihrer Zentrale.
Einrichtung mit Motorola-Zentralen
Damit Sie den Weichenantrieb digital ansteuern können,
müssen Sie diesem zunächst eine Digitaladresse zuwei-
sen. Zur Steuerung im Märklin-Motorola-System gehen
Sie wie folgt vor:
1. Schalten Sie das Digitalsystem aus, z. B. Not-Aus.
Es darf keine Spannung mehr am Gleis anliegen.
2. Verbinden Sie nur die grün markierte Steuerleitung
und die Stromversorgungsleitungen des Weichenan-
triebs (braun und gelb, s. Abb. 15) mit dem Gleis.
3. Schalten Sie das Digitalsystem ein.
4. Verbinden Sie die zweite (rot markierte) Steuerleitung
gleichfalls mit dem Gleis (s. Abb. 14).
5. Senden Sie mit der Digitalzentrale nun für die ge-
wünschte Motorola-Adresse einen Schaltbefehl.
Der Weichenantrieb empfängt den Befehl, registriert
die Adresse und quittiert dies durch Umschalten.
1. Switch off the digital system (e. g. emergency off).
There must not be any power at the rails.
2. Connect only the blue wire with the red marker and
the power supply wires of the switch motor (brown
and yellow, see gure 15) to the rails.
3. Switch on the digital system.
4. Connect the second blue wire (green marker) to the
track signal too (see gure 14).
5. Use the digital command station to send a switch-
request for the desired DCC-address. The switch mo-
tor receives the request, registers the address as it’s
own and as a receipt, it switches the turnout.
The switch motor is now ready to be used with the new
digital address. Whether you want to change the address,
you just have to repeat the described procedure.
Program via CV:
It is possible to congure the switch motor via the track
signal (POM = programming on the main), if your digital
command station supports this feature. Therefore the
command station sends the new data in CVs 1 and 9 to
the old address. Observe the information in the manual of
your digital command station.
Congure with Motorola central units
To use the switch motor in a digital environment, you
have to assign a digital address at rst. To control the
switch motor with a Motorola-system, observe the fol-
lowing instructions:
1. Switch off the digital system (e. g. emergency off).
There must not be any power at the rails.
2. Connect only the blue wire with the green marker and
the power supply wires of the switch motor (brown
and yellow, see gure 15) to the rails.
3. Switch on the digital system.
4. Connect the second blue wire (red marker) to the
track signal too (see gure 14).
5. Use the digital command station to send a switch-
request for the desired Motorola-address. The switch
motor receives the request, registers the address as
it’s own and as a receipt, it switches the turnout.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann 4554 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann 4554 in the language / languages: English, German as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info