652054
2
Zoom out
Zoom in
Previous page
1/8
Next page
2
DE EN
1. Wichtige Hinweise
Bitte lesen Sie vor der ersten Anwendung des
Produktes bzw. dessen Einbau diese Bedienungs-
anleitung aufmerksam durch. Bewahren Sie diese
auf, sie ist Teil des Produktes.
1.1 Sicherheitshinweise
Vorsicht:
Verletzungsgefahr!
Aufgrund der detaillierten Abbildung des Origi-
nals bzw. der vorgesehenen Verwendung kann
das Produkt Spitzen, Kanten und abbruchge-
fährdete Teile aufweisen. Für die Montage sind
Werkzeuge nötig.
Stromschlaggefahr!
Die Anschlussdrähte niemals in eine Steckdo-
se einführen! Verwendetes Versorgungsgerät
(Transformator, Netzteil) regelmäßig auf Schä-
den überprüfen. Bei Schäden am Versorgungs-
gerät dieses keinesfalls benutzen!
Alle Anschluss- und Montagearbeiten nur bei
abgeschalteter Betriebsspannung durchführen!
Ausschließlich nach VDE/EN-gefertigte Modell-
bahntransformatoren verwenden!
Stromquellen unbedingt so absichern, dass es
bei einem Kurzschluss nicht zum Kabelbrand
kommen kann.
1.2 Das Produkt richtig verwenden
Dieses Produkt ist bestimmt:
- Zum Einbau in Modelleisenbahnanlagen und
Dioramen.
- Zum Anschluss an einen Modellbahntransfor-
mator (z. B. Art.-Nr. 5200) bzw. an einer Mo-
dellbahnsteuerung mit zugelassener Betriebs-
spannung.
- Zum Betrieb in trockenen Räumen.
Jeder darüber hinausgehende Gebrauch gilt als
nicht bestimmungsgemäß. Für daraus resultieren-
de Schäden haftet der Hersteller nicht.
1.3 Packungsinhalt überprüfen
Kontrollieren Sie den Lieferumfang auf Vollständigkeit:
- Signalmodell mit 2 Antrieben
- Etikett mit Bezeichnungsschildern
- 2 Schrauben (4 Schrauben bei Art.-Nr. 4503)
- Nur bei Art.-Nr. 4503: Langsamfahrwiderstand Art.-
Nr. 5216 mit 4 roten Steckern und Zusatzanleitung
- Anleitung
1. Important information
Please read this manual completely and attentive-
ly before using the product for the rst time. Keep
this manual. It is part of the product.
1.1 Safety instructions
Caution:
Risk of injury!
Due to the detailed reproduction of the original
and the intended use, this product can have
peaks, edges and breakable parts. For installa-
tion tools are required.
Electrical hazard!
Never put the connecting wires into a power
socket! Regularly examine the transformer for
damage. In case of any damage, do not use the
transformer!
Make sure that the power supply is switched o
when you mount the device and connect the
cables!
Only use VDE/EN tested special model train
transformers for the power supply!
The power sources must be protected to
prevent the risk of burning cables.
1.2 Using the product for its correct
purpose
This product is intended:
- For installation in model train layouts and
dioramas.
- For connection to an authorized model train
transformer (e. g. item-No. 5200) or a digital
command station.
- For operation in dry rooms only.
Using the product for any other purpose is not
approved and is considered incorrect. The
manufacturer is not responsible for any damage
resulting from the improper use of this product.
1.3 Checking the package contents
Check the contents of the package for completeness:
- Model of the signal with 2 drive units
- Sticker with nameplates
- 2 Screws (4 Screws at item-No. 4503)
- Only with item-No. 4503: Slow speed resistor item-
No. 5216 with 4 red plugs and additional manual
- Manual
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann 4532 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann 4532 in the language / languages: English, German as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info