652059
6
Zoom out
Zoom in
Previous page
1/8
Next page
6
rt bn rt 1 gn rt 2 gn
ON
1
2
3
4
5
6
7
8
WP
Viessmann
5211
Magnetartikeldecoder
rt bn E gn 4 rt gn 3 rt
Diode
16 V ~ / =
16 V ~ / =
braun
grün
rot
blau
gelb
z. B. 5211
gelb
Digitalzentrale
Optional:
separater Anschluss des
Lichtstroms.
Widerstand
brown
green
red
blue
yellow
e. g. 5211
diode
resistor
Digital Command Station
Option:
separate power
supply for lights
yellow
Abb. 6 Fig. 6
Vorsicht:
Bei Betrieb mit Dauerstrom kann die Antriebs-
spule beschädigt werden, wenn die Schaltspan-
nung zu niedrig ist und deshalb die Endab-
schaltung nicht erreicht wird.
Empfehlung: Schalten per Impuls (z. B. Taster
statt Schalter) mit Wechselspannung.
Analoge Ansteuerung
Abb. 7 zeigt, wie einfach Sie die zweibegrifgen
Formsignale mit Hilfe der Viessmann Tastenstell-
pulte (z. B. Art.-Nr. 5547 ohne Rückmeldung oder
Art.-Nr. 5549 mit Rückmeldung durch LEDs) an-
schließen können. Schalter, Taster und Relais an-
derer Hersteller können Sie natürlich auch ver-
wenden.
Digitale Ansteuerung
Viessmann-Formsignale können auch von einem
Digitalsystem angesteuert werden (Abb. 6). Beim
Anschluss z. B. an einen Magnetartikel-Decoder
müssen Sie darauf achten, dass neben den blau-
en Kabeln zur Signalsteuerung auch das gelbe
Kabel (ohne Markierung) für die Stromversorgung
angeschlossen ist. Zum digitalen Schalten eines
zweibegrifgen Signals wird eine Ausgangsgruppe
eines Magnetartikeldecoders benötigt (s. Abb. 6).
Vorsicht:
Der Viessmann Universalantrieb benötigt eine
Schaltspannung von mind. 14 V, ansonsten kann
es zu Störungen des Antriebs kommen.
Verwenden Sie ausschließlich Magnetartikelde-
coder mit separater Schaltspannungseinspei-
sung (z. B. alle Viessmann Magnetartikeldeco-
der) und einen ausreichend starken Trafo (z. B.
Art.-Nr. 5200).
Caution:
When using constant current to operate the sig-
nal, the drive unit may be damaged due to a
low switching voltage.
Recommendation: Operate the signal via puls-
es (e. g. push button instead of switch) and with
AC.
Analogue wiring
The conventional wiring is shown in g. 7. It
shows how to connect the two-aspect form sig-
nals to a push-button panel (e. g. item-No. 5547
or 5549).
Digital control
The semaphore signals can also be operated with
a digital system. Refer to g. 6 on the following
page for the correct wiring.
Simply connect the wires to a digital decoder.
Item-No. 5212 is suitable for the NMRA DCC for-
mat.
Viessmann delivers decoders for all digital sys-
tems and standards:
Item-No. 5211: compatible with the Märklin /
Motorola and Märklin-Systems format.
Caution:
The Viessmann universal drive unit requires at
least 14 V for switching, otherwise it might not
function correctly.
Use only decoders with external power supply (all
Viessmann accessory decoders have this fea-
ture) and a powerful enough transformer (e. g.
item-No. 5200).
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann 4531 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann 4531 in the language / languages: English, German as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Viessmann 4531

Viessmann 4531 User Manual - Dutch, French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info