652051
6
Zoom out
Zoom in
Previous page
1/8
Next page
6
16 V = /
~
E
1,5 kΩ
1/4 Watt
Viessmann-Formsignale
mit 2 Antrieben
Viessmann semaphores
with 2 drive units
Zu weiteren
Decodern
to further
decoders
16 V = /
~
z. B. Entkupplungsgleis
e. g. uncoupling track
rt bn rt 1 gn rt 2 gn
ON
1
2
3
4
5
6
7
8
WP
Viessmann
5211
Magnetartikeldecoder
rt bn E gn 4 rt gn 3 rt
Adresse
blau
blue
rot/red
braun/brown
rot /red
braun/brown
gelb/yellow
braun/brown
gelb mit schwarzer
Markierung
yellow with black marking
rot/red
Abb. 5 Fig. 5
6.1 Analoge Ansteuerung
Abb. 6 zeigt, wie einfach Sie die dreibegrigen
Formsignale mit Hilfe der Viessmann Tastenstell-
pulte Art.-Nr. 5546 (ohne Rückmeldung) oder
5548 (mit Rückmeldung durch LEDs) anschließen
können. Schalter, Taster und Relais anderer Her-
steller können Sie ebenfalls verwenden.
6.2 Digitale Ansteuerung
Viessmann Formsignale können auch von einem
Digitalsystem angesteuert werden (Abb. 5). Beim
Anschluss z. B. an den Viessmann Magnetartikel-
Decoder 5211 (Märklin-Motorola) müssen Sie da-
rauf achten, dass neben den blauen Kabeln zur
Signalsteuerung auch das gelbe Kabel (ohne Mar-
kierung) für die Stromversorgung angeschlossen
ist. Zum digitalen Schalten eines dreibegrigen
Signals werden 1½ Ausgangsgruppen eines Ma-
gnetartikeldecoders benötigt (s. Abb. 5). Die nicht
benötigte Ausgangsbuchse kann für ein weiteres
dreibegriges Signal verwendet werden (zusam-
men mit einer anderen Ausgangsgruppe) oder für
ein Entkupplungsgleis.
Viessmann Formsignale mit 2 Antrieben benötigen
positive Schaltimpulse. Daher kann man die Signale
nicht ohne Weiteres mit allen Magnetartikeldeco-
dern (z. B. Lenz, Trix, LDT, Roco, Zimo etc.) schal-
ten, da diese Decoder negative Schaltimpulse lie-
fern. Viessmann Decoder liefern positive Schaltim-
pulse (z. B. Art.-Nr. 5211, 52111, 5280).
6.1 Analogue control
The conventional wiring is shown in g. 6. It
shows easy connection of the 3-aspect sema-
phore signals by using the Viessmann universal
push button panel item-No. 5546 (with feedback
by LEDs). You can also use switches, push-but-
tons and relays of other manufactures.
6.2 Digital control
The semaphore signals can also be operated
with a digital system (g. 5). When connecting,
e.g. to the Viessmann digital decoder 5211 (Mär-
klin-Motorola), you must ensure that in addition to
the blue cables for the signal control also the yel-
low cable (without marking) for the power supply
is connected. For digital switching of a 3-aspect
signal, 1 1/2 output groups of a digital decod-
er are required (s. g. 5). The not required output
jack can be used for another 3-aspect signal (to-
gether with another output group) or for an uncou-
pling track.
Viessmann semaphore signals with 2 drive units
require positive switching impulses. Because of
this, you can not switch all signals with all decod-
ers (e. g. Lenz, Trix, LDT, Roco, Zimo etc.). This
decoders semd negative switching impulses.
Viessmann decoders send positive impulses (e. g.
item-No. 5211, 52111, 5280).
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Viessmann 4502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Viessmann 4502 in the language / languages: English, German as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info