785232

Victron VE.Direct Bluetooth Smart dongle Manual

2
Zoom out
Zoom in
Previous page
1/4
Next page
Last
update:
2018-03-16
15:57
ve.direct:ve.direct_to_bluetooth_smart_dongle https://www.victronenergy.com/live/ve.direct:ve.direct_to_bluetooth_smart_dongle
https://www.victronenergy.com/live/ Printed on 2018-06-11 16:42
Supported phones, tablets and computers
See the VictronConnect manual.
VictronConnect App
The dongle works together with the VictronConnect App. Download links for iPhone, iPad as well as
Android devices are available on our software page
LED Status codes
The dongle has two LEDs, a Bluetooth status LED (blue), and an error LED (red).
On power-up, both LEDs will be on or alternating quickly (fast blinking).
When both LEDs are on, the dongle contains valid firmware and will act as VE.Direct gateway. When
both LEDs stay on, something is wrong with the communication on VE.Direct.
When the LEDs are alternating quickly, the dongle is in firmware update mode and it will show up as
dongle in VictronConnect. After connecting, a firmware update can be performed. When the dongle
already contains valid firmware, it will fall back to normal operation after 30 seconds.
Blue LED Red LED Dongle state Connection State Remark
On On VE.Direct gateway Disabled
VE.Direct communication
problem.
The dongle will not advertise
itself so
it will not be visible in
VictronConnect.
Slow blinking Off VE.Direct gateway Not connected
On Off VE.Direct gateway Connected
Double flash Double flash VE.Direct gateway Clearing pin
Fast blinking Fast blinking Firmware update Not connected Red and Blue LED Alternating
On Slow blinking Firmware update Connected
On Faster blinking Firmware update Uploading
Fast blinking Off Firmware update Programming
Troubleshooting
I don't see my product in the discovery screen
Only one phone or tablet can be connected to a dongle at the same time. Make sure no other
devices are connected to the dongle, and try again.
The dongle does not support all Victron products. Check if your Victron product is listed in the
section above.
The dongle is powered via the VE.Direct cable connection. Make sure the dongle is connected to
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron VE.Direct Bluetooth Smart dongle at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron VE.Direct Bluetooth Smart dongle in the language / languages: English as an attachment in your email.

The manual is 0.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info