Manual Victron SmartSolar MPPT 100 20 (page 3 of 86) (English, German, Dutch, French, Swedish, Spanish)

785395

Zoom out

Zoom in

1/86

EN NL FR DE ES SE Appendix

1 General Description

1.1 Bluetooth Smart built-in: dongle not needed

The wireless solution to set-up, monitor and update the controller using Apple and

Android smartphones, tablets or other devices.

1.2 VE.Direct

For a wired data connection to a Color Control panel, PC or other devices

1.3 Ultra fast MPPT tracking

Especially in case of a clouded sky, when light intensity is changing continuously, a fast

MPPT algorithm will improve energy harvest by up to 30% compared to PWM charge

controllers and by up to 10% compared to slower MPPT controllers.

1.4 Load output

Deep discharge of the battery can be prevented by connecting all loads to the load

output. The load output will disconnect the load when the battery has been discharged

to a pre-set voltage.

Alternatively, an intelligent battery management algorithm can be chosen: see Battery

Life.

The load output is short circuit proof.

Some loads with high inrush current can best be connected directly to the battery. If

equipped with a remote on-off input, these loads can be controlled by connecting the

load output of the controller this remote on-off input. A special interface cable may be

needed, please see section 3.7.

Alternatively, a BatteryProtect may be used to control the load. Please see our website

for specifications.

1.5 Battery Life: intelligent battery management

When a solar charge controller is not able to recharge the battery to its full capacity within

one day, the result is often that the battery will continually be cycled between a ‘partially

charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full

recharge) will destroy a lead-acid battery within weeks or months.

The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day

by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the

harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that

point onwards the load disconnect level will be modulated so that a nearly 100% recharge is

achieved about once every week.

1.6 Internal temperature sensor

Compensates absorption and float charge voltages for temperature.

1.7 Automatic battery voltage recognition

The controller will automatically adjust itself to a 12V or a 24V system one time only.

If a different system voltage is required at a later stage, it must be changed manually, for

example with the Bluetooth app see section 1.9.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Victron SmartSolar MPPT 100 20 in the language / languages: English, German, Dutch, French, Swedish, Spanish as an attachment in your email.

The manual is 1.44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Victron SmartSolar MPPT 100 20 Manual

Product: