785222
39
Zoom out
Zoom in
Previous page
1/40
Next page
12. Technical specifications Lynx Smart BMS
Power
Supply voltage range 9 – 58Vdc
Supported system voltages 12, 24 or 48V
Reverse polarity protection Yes
Main safety contactor continious current rating 500A continuous
Main safety contactor peak current rating 600A for 5 minutes
Power consumption hibernate or standby mode Approximately 10.4mW (0.8mA at 13V)
Power consumption in active mode Approximately 2.6W (200mA at 13V) depending on the state of the
relays
Minium load resistance for pre-charging 10Ω and above for 12V systems
20Ω and above for 24V and 48V systems
AUX output maximum current rating 1.5A continuous
Allow-to-charge port
Maximum current rating
0.5A at 60Vdc
Allow-to-discharge port
Maximum current rating
0.5A at 60Vdc
Alarm relay (SPDT)
Maximum current rating
2A at 60Vdc
Connections
Busbar M8
VE.Can RJ45 and RJ45 terminator
I/O Screw terminals
Battery BMS cables Male and female circular 3-pole connector with M8 screw ring
Lynx distributor (up to 4 modules) RJ11 (cable ships with each Lynx Distributor)
Physical
Enclosure material ABS
Enclosure dimensions (hxwxd) 190 x 180 x 80mm
Unit weight
Busbar material Tinned copper
Busbar dimensions (hxw) 8 x 30mm
Environmental
Operating temperature range -40°C to +60°
Storage temperature range -40°C to +60°
Humidity Max. 95% (non-condensing)
Protection class IP22
Lynx Smart BMS
Page 36
Technical specifications Lynx Smart
BMS
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Lynx Smart BMS 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Lynx Smart BMS 500 in the language / languages: English as an attachment in your email.

The manual is 3.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info