785237

Victron Galvanische Diode Isolator VDI-16 Manual

1
Zoom out
Zoom in
Previous page
1/4
Next page
Rev 03 30-04-2019
Victron Energy bv / De Paal 35 / 1351 JG ALMERE / The Netherlands
Phone: (+31) (0)36 535 97 00 / www.victronenergy.com / e-mail: sales@victronenergy.com
EN: INSTALLATION MANUAL Galvanic Isolator VDI-16, VDI-32 and VDI-64
1. Mounting location
Warning!
For safety purposes, the product should be installed in a heat-resistant environment. Avoid the presence of e.g. chemicals,
synthetic components, curtains or other textiles in the immediate vicinity of the product.
1.1. Install the galvanic isolator in a well ventilated area.
1.2. Keep a clear space of 10 cm around the product for ventilation.
1.3. The galvanic isolator must be mounted with its length vertical to allow for maximum cooling. Under normal circumstances, the
temperature increase of the heat sink is not more than 20°C. However the unit may become hot when conducting fault ground
current.
2. Installation
Warning!
The galvanic isolator must be wired into the green (safety) grounding conducting connection ahead of all grounding connections
to the vessel such that no ground connections on the vessel bypass the galvanic isolator making it ineffective.
2.1. Connections and safety features must be according to the locally applicable regulations.
2.2. Use electric cables of the appropriate size.
2.3. Wire the galvanic Isolator into the green (safety) grounding conducting connection as shown in fig. 1.
Figure 1: wiring diagram
NL: INSTALLATIEHANDLEIDING Galvanische isolator VDI-16, VDI-32 en VDI-64
1. Montageplaats
Waarschuwing!
Om veiligheidsredenen dient dit product te worden geïnstalleerd in een hittebestendige omgeving. Voorkom daarom de
aanwezigheid van bijvoorbeeld chemicaliën, synthetische onderdelen, gordijnen of ander textiel in de directe omgeving van het
product.
1.1. Installeer de galvanische isolator in een goed geventileerde ruimte.
1.2. Houd rondom het product een ruimte van 10 cm vrij voor ventilatie.
1.3. De galvanische isolator moet verticaal worden gemonteerd om een optimale koeling te bereiken. Onder normale omstandigheden
bedraagt de temperatuurstijging van het koellichaam niet meer dan 20°C. De unit kan echter heet worden door kortsluitstromen.
2. Installatie
Waarschuwing!
De galvanische isolator moet worden aangesloten op de groene (veiligheids-) aarddraad vóór alle aardingsverbindingen met
het schip, zodat geen aardingsverbinding van het schip de galvanische isolator kan omzeilen en deze daardoor ineffectief
wordt.
2.1. Aansluitingen en veiligheidsmaatregelen moeten worden uitgevoerd in overeenstemming met de plaatselijk van toepassing zijnde
regelgeving.
2.2. Gebruik elektrische kabels van een juiste doorsnede.
2.3. Verbind de galvanische isolator met de groene (veiligheids-) aarddraad, zoals aangegeven in afb. 1.
Afbeelding 1: Aansluitschema
VDI-16 VDI-32 VDI-64
Galvanic Isolator Waterproof (potted)
Maximum current
16 A
32 A
64 A
Peak current (20 ms) 1600 A 3200 A 6000 A
Connection M6 M6 M6
Heat sink
Material Anodized aluminium
Protection category
Weight
1 kg
2 kg
3,2 kg
Dimensions (hxwxd) VDI-16 60 x 120 x 200 mm
Dimensions (hxwxd) VDI-32 63 x 164 x 200 mm
Dimensions (hxwxd) VDI-64 63 x 164 x 335 mm
VDI-16 VDI-32 VDI-64
Galvanische isolator Waterdicht (ingekapseld)
Maximale spanning
16 A
32 A
64 A
Piekstroom (20 ms) 1600 A 3200 A 6000 A
Aansluiting M6 M6 M6
Koellichaam
Materiaal Geanodiseerd aluminium
Beschermingsklasse
Gewicht
1 kg
2 kg
3,2 kg
Afmetingen (hxbxd) VDI-16 60 x 120 x 200 mm
Afmetingen (hxbxd) VDI-32 63 x 164 x 200 mm
Afmetingen (hxbxd) VDI-64 63 x 164 x 335 mm
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victron Galvanische Diode Isolator VDI-16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victron Galvanische Diode Isolator VDI-16 in the language / languages: English, German, Dutch, French, Italian, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 0.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info