471279
29
Zoom out
Zoom in
Previous page
1/30
Next page
29
12. Is there a problem?
If something is not working, you can
use the table below to try and correct
the fault. If you are unable to remedy
the fault by yourself, please contact
Customer Service.
ƽ Warning!:
Before carrying out any maintenance
work on the sewing machine, first pull
the plug out of the power socket. This
will prevent the risk of accidents due to
the machine being started unintention-
ally.
Fault / Problem: Check: Possible remedy:
Material is not moved through Machine does not sew – Press handwheel in!
Only the handwheel turns?
Stitch length wheel set to "0"? Set it at a value from "1“ to "4".
Presser pressure too weak? Set the pressure lever higher.
Needle breaks Needle set incorrectly? Set flat end towards the rear!
Needle is bent? Insert a new needle.
Are the needle + thread + material Select the correct needle for the
as in the Table in Chapter 10? thread and material.
The upper thread breaks Was it threaded correctly? It's best to re-thread from the
beginning!
Zigzag setting too wide? Try a smaller width.
Upper thread too taut? Select the middle setting.
Scoring / scratches on the gripper? Replace the gripper.
Lower thread breaks Lower thread too taut? Reduce the thread tension.
Needle set incorrectly? Set flat end towards the rear!
Was it threaded correctly? It's best to re-thread from the
beginning!
Dust and fluff in the gripper? Clean the gripper area
Ripples in the material Thread tension too high? Reduce the tension!
Foot pressure too high? Reduce the foot pressure!
Are the needle + thread + material Select the correct needle for the
as in the Table in Chapter 10? thread and material.
IB_Sewingmachine_content_UK.qxd 22.07.2004 12:21 Uhr Seite 29
29


Need help? Post your question in this forum.

Forumrules
1

Forum

victoria-270e

Reset search

  • Having problems with stitch program
    A is not doing straight stitches it only doing zzags stitches at times do M Submitted on 5-11-2020 at 13:16

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Victoria 270E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Victoria 270E in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Victoria 270E

Victoria 270E User Manual - German - 30 pages

Victoria 270E User Manual - Dutch, French - 87 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info