650701
4
Zoom out
Zoom in
Previous page
1/6
Next page
7
5. How to Read the Display
Display Display Meaning
Self-check ensures proper
functioning.
Recall of last reading.
Ready to measure.
Measurement complete.
Low battery indication.
Unit will not take accurate
measurements.
Description
Press the ON/OFF button to turn
on the unit. All icons will be
shown for 2 seconds.
The last reading will be shown
on the display automatically for
3 seconds.
The unit beeps once and the
°F icon will keep flashing.
The reading will be shown on
the LCD display. When the °F
starts to flash the unit is ready
for next temperature.
The battery icon will flash when
the unit is on to alert you to
replace the batteries.
(1) Remove protective cap from thermometer.
Pull sensor cover into position over the hole in
the top of dispenser.
(3)
Completely push the tip into the
sensor cover holder hole. Push firmly.
(2) With Protective Cap off, push the thermometer
vertically into the center part of the sensor
cover.
(4) After feeling a slight click, take out the sensor
with cover attached tightly.
NOTE:
Unit is calibrated to work with sensor covers. Only use of VICKS sensor covers ensures
accuracy and hygienic use.
In order to avoid spreading germs, please use a new sensor cover for each measurement.
Check to ensure sensor cover is fitted on firmly before use. If the sensor cover is broken,
discard and apply a new one immediately.
Failure to use sensor covers each time will result in low, misreadings.
6. How to Apply a New Sensor Cover
3. Product Description
(1) Sensor Cover
(2) Soft Sensor Tip
(3) Readout Display
(4) Start Button
(5) ON/OFF Button
(6) Battery Cover
(7) Senser Cover
Applicator
(8) Protective
Storage Cap
4. How the VICKS
®
Ear Thermometer Measures Ear Temperature
The VICKS Ear Thermometer measures infrared energy radiated from
the eardrum and the surrounding tissue. This energy is collected
through the sensing lens and converted to a temperature value. The
measured reading obtained directly from the eardrum (Tympanic
Membrane) can ensure the most accurate ear temperature.
Measurements taken from the surrounding tissue of the ear canal
generate lower readings and may result in misdiagnosis of a fever.
To avoid an inaccurate measurement:
Use VICKS sensor covers. The unit is calibrated to work with sensor covers.
Straighten the ear canal by gently pulling the middle of the ear back and up. Pull the ear
straightback for newborns to age 1.
Place the sensor firmly into the ear canal. Press the Start button and keep the sensor in the
ear until the thermometer beeps to indicate completion of the measurement.
The VICKS Ear Thermometer has been clinically tested to meet ASTM standard E-1065
as pertains to infrared thermometers. It is proven to be safe and accurate when used
in accordance with this operating instruction manual.
6
(2)
(3)
(4)
(5)
(6)
(7)
(8)
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vicks V971N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vicks V971N in the language / languages: English as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info