623538
18
Zoom out
Zoom in
Previous page
1/44
Next page
17
3.CHAPTER:
Touch screen
84" touch screen with the feature of multi-spot touch (6 spot at the same time) and infrared technology.
Using the Touch Screen with External Battery
Touch screen is integrated with Embedded Computer Module. IF you want to use the touch screen
when an external source is connected via HDMI or VGA, please connect the external source to
"INTERACTIVE BOARD" via a USB-USB cable. Connect that cable to the displayed UB input as
shown. Touch screen will be active in a short time. "To use the touch screen by an external source
may require a driver. In this case, the chosen required touch screen driver should be loaded to
external source device from the CD given with that device."
Touch screen controls the currently displayed image on the screen. If "Embedded Computer" is being
used as source, touch screen controls the "Embedded Computer". If an external source is connected
via HDMI or VGA and chosen as image, if touch screen is connected that source via USB, touch
screen is automatically transferred to control that source.
WARNING: To active the touch screen feature of the Interactive Board, the processing system should
be started.
WARNING: The touch screen feature of your Interactive Board is not supported for MacOs processing
system.
Touch Screen Installation
3.1.1. About installation
1.
Before starting installation, ensure that all drives as display chart and USB are installed correctly.
The usage of standard drivers given by manufacturers is recommended.
2.
The multi-spot touch screen should be connected before installation.
3.
Close the antivirus programme and Trojan preventing programme before installation (as 360
antivirus and 260 safeguard).
4.
If the used driver has been installed in the computer before, please unload the installation
completely and, if needed, delete the old installation files.
5.
Standard USB extension cord should be used as USB connector cable.
6.
If you use Windows XP processing system, you should first install Microsoft.net Framework 2.0.
7.
After the VGA and HDMI connections of the screen and server connections are unplugged and
plugged again, the USB connection of touch screen should also be unplugged and plugged again.
Otherwise, touch system will not function properly.
8.
After the USB connection is ready, the driver will be loaded automatically and the touch screen will
be ready to use.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vestel 84 Interactive Flat Panel Display at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vestel 84 Interactive Flat Panel Display in the language / languages: English as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info