815500
20
Zoom out
Zoom in
Previous page
1/46
Next page
20 8390-975Vermont Castings • Deant® Model 1975-CAT-C Installation Manual_R20 • 08/23
ST540
Assembly
handle
11/00
Figure 3.8-Assemblethefrontdoorhandle.
ST635
Encore
Install thermostat
handle
2/01
Figure 3.7-Attachthethermostathandle.
E. Attach Catalyst Bypass Damper Handle
Usethe1/4"-20x3"screwtoattachthecatalystbypassdamper
handle to the catalyst bypass damper stub on the left side.
F. Install Catalyst Temperature Probe
Toinstallthecatalysttemperatureprobe,removethehole
plugfromthecastironwallbehindtherearshield,Figure3.6.
Usetwo#10sheetmetalscrewsandbracketsupplied,secure
thebracketandprobetothebackofyourstove,Figure3.6.
H. Assemble the Removable Insert Handle
The wooden removable insert handle opens and closes the
frontdoors.Removeaftereachuse,andstoreitinthehandle
holder behind the right front leg.Assemble the handle by
passingthe3-3/8"screwthroughthewoodenshaftandinto
thebrightmetalnub,Figure3.8.Tightencarefullyuntilsnug.
G. Attach Primary Air Thermostat Handle
The primary air thermostat handle is the smaller of the two
black handles. Secure the handle to the stub on the right
sideofthestovewithan8-32x2"slotheadmachinescrew,
Figure 3.7.
WARNING
Theuecollarheatshieldmustbeinstalledinallvertical
installations.Theuecollarheatshieldisnotusedwhen
theuecollarisintherearexitposition.
C. Adjust the Leg Levelers
Lift the stove slightly so there is no weight on the leg while
making the adjustment.
D. Reverse Flue Collar (If necessary)
Reversetheuecollarbyremovingthetwoscrewsthatattach
it to the back of the stove. Be sure the gasket around the
uecollaropeningisinpositionwhenyouscrewthecollar
back onto the stove.
Figure 3.6-InstalltheCatalystTemperatureProbe
1.4"
1.8"
Bracket mounting screw hole location
Fold bracket strap over
catalyst probe shaft
and secure with screw.
Insertcatalystprobe
through sheetmetal and
castironbackandtwist&
pushthroughberpanel.
Removeholdplug
from cast iron back.
Insertcatalystprobebracket
withself-drillingscrew.
Figure 3.5-Installuecollarheatshield.
ST1180
flue collar heat shield
Sheet Metal
Screws
Sheet Metal
Screws
FlueCollar
HeatShield
20

Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vermont Castings Defiant at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vermont Castings Defiant in the language / languages: English as an attachment in your email.

The manual is 6,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vermont Castings Defiant

Vermont Castings Defiant User Manual - French - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info