585216
3
Zoom out
Zoom in
Previous page
1/52
Next page
HAM982K 3 VELLEMAN
d. Testing
a. Apply 12V DC power and allow 3-5 minutes for the detector to warm up and stabilise before testing.
b. Walk into the protected area at a speed of 1 step per second and watch the LED.
c. The alarm will be triggered when movement is detected. If the pulse count jumper is set to "harsh", 2 detections
need to be made in 12 seconds time for the alarm to be triggered.
d. If proper detection does not occur during the walk tests, relocating or re-aiming the detector may be required.
4. Magnetic Reed Switches
magnetic switch, standard type
white ABS
mounting with screws or double-sided tape
operating gap: max. 15mm
dimensions: 51 x 13 x 13mm.
5. Panic button
NC & NO alarm circuit connection
screw connectors
momentary contact (off / on)
contact rating: 0.5A / 24Vdc max
colour: ivory
dimensions: 76 x 22.5 x 16mm
6. Control Panel
a. Front Panel
LEDs ON OFF FLASHING
zone LEDs (8)
zone unsealed – wire is
possibly disconnected.
Zone sealed (normal)
fast: zone is/was in alarm
fast with interval: zone is in alarm memory –
system disarmed
slow: zone is isolated
exit/armed alarm armed alarm disarmed exit delay period
AC power failure, system runs on battery
(flashing starts 20-30s after power failure)
AC power system on AC power
'AC power' & 'battery' flashing alternatively:
system is in power-up delay period
battery battery faulty normal
battery is under test
program system in program mode
normal
arm prohibited
system in arm prohibited
mode: indicator is on
during exit delay period
System armed (exit delay
expired)
System forced to arm
system cannot be armed after exit delay
expired due to faulty zone(s) – see zone
indicators for the faulty zone(s)
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velleman HAM982K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velleman HAM982K in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info