Manual Velleman DVM894 (page 5 of 110) (English, German, Dutch, French, Polish, Portuguese, Spanish)

622301

Zoom out

Zoom in

1/110

DVM894

V. 01 – 21/01/2015 5 ©Velleman nv

When using the mA terminal: do not measure current in circuits with

voltages > 250 V.

When using the 10A terminal: do not measure current in circuits with

voltages > 500 V.

Disconnect circuit power and discharge all high-voltage capacitors before

testing resistance, continuity, capacitance or diodes. For transistor tests,

use the included transistor socket.

In TV repair work or when carrying out measurements on power switching

circuits, remember that high-amplitude voltage pulses at the test points

can damage the meter. Use of a TV filter will attenuate any such pulses.

Do not replace internal parts yourself. Replace damaged or lost

accessories by identical ones with the same specifications. Order spare

accessories, e.g. test leads, from your dealer.

Switch off the meter and remove test probes prior to replacing the

battery or fuses.

All modifications of the device are forbidden for safety reasons. Damage

caused by user modifications to the device is not covered by the

warranty.

 If the meter is used near a source of electromagnetic interference, the display

may become unstable or may indicate large errors.

 Use the meter only as specified in this manual; otherwise, the protection

provided by the meter may be impaired.

 Use extreme caution when working around bare conductors or bus bars.

 Do not operate the meter near explosive gases, vapour, or dust.

 Verify the meter’s operation by measuring a known voltage. Do not use the

meter if it operates abnormally. Protection may be impaired. When in doubt,

have the meter serviced by a qualified technician. Make sure the device cannot

be used until it is repaired.

 When making connections, connect the common test lead (black) before

connecting the live test lead (red). When disconnecting, disconnect the live test

lead (red) before disconnecting the common test lead (black).

 Before changing functions or measuring range, disconnect the test leads from

the circuit under test.

 For all DC functions, to avoid the risk of shock due to possible improper

readings, verify the presence of any AC voltages first by using the AC function.

Then select a DC voltage range equal to or greater than the AC range.

 Use a 9 V battery, properly installed in the meter’s battery case, to power the meter.

 Replace the battery as soon as the battery indicator appears. With a low

battery, the meter may produce false readings that can lead to electric shock

and personal injury.

 Do not operate the meter with the case (or part of the case) removed.

 Always verify that all connections are reliable and safe.

 Avoid body contact with ground potential (e.g. metallic terminals, output

sockets, lead clamp…) while measuring. Make sure to be electrically insulated

from ground during measurement.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Velleman DVM894 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Velleman DVM894 Manual

Product: