622289
9
Zoom out
Zoom in
Previous page
1/47
Next page
DVM3218
19.01.2011 ©Velleman nv
9
a. General mainenance:
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
b. Fuse Replacement
Remove COM probe [9] and test pin [1] from the circuit under test.
Switch off the multi-meter.
Unscrew the test pin [1] and remove the front cover.
Remove the fuse from the fuse holder and replace it with a new fuse of the same type and
with the same specifications (F500mA/250V, Ø 5 x 20mm).
Close the cover and re-install the test pin [1].
c. Battery Replacement
Replace the battery as soon as the “ ” indication appears on the display.
Remove COM probe [9] and test pin [1] from the circuit under test.
Switch off the multi-meter.
Unscrew the release knob [8] and remove the back cover.
Replace the batteries by 2 new batteries of the same type and with the same specifications
(1.5V – LR44).
Close the battery compartment carefully and tighten the release knob [8].
Notes:
o Do not try to repair or calibrate the meter yourself; contact your dealer.
o Replace damaged accessories immediately; order them at your local dealer.
o Do not use the meter when it is damaged.
9. Technical specifications
This device is not calibrated when purchased!
Regulations concerning environment of use:
Use this meter only for measurements in CAT I, CAT II and CAT III environments (see §4)
Use this meter only in a pollution degree 2 environment (see §5)
Ideal temperature 18-28°C
Ideal relative humidity 75%
Max. altitude 2000m
Overvoltage/installation category CAT III 600V / CAT II 1000V
Pollution degree Pollution degree 2
Operating temperature 0°C~40°C (RH<80%)
Storage temperature -10°C~60°C (RH<70, store without batteries!)
fuses mA range F500mA / 250V, 5 x 20mm
Overrange indication yes (‘OL’)
Low battery indication yes ( )
Polarity indication ‘-’ automatic indication
“Hold” function yes
Backlight function no
Automatic switch off yes
Power 2 x 1.5V LR44 batteries V13GA (incl.)
Dimensions 230 x 35 x 20mm
Weight ±200g
Accessoires manual / batteries
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velleman DVM3218 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velleman DVM3218 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info