661688

Velbon ULTRA 555 Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
ULTRA 655(A)/ULTRA 555(A)
Hold Rubber foot tightly and rotate it towards unlock
direction and feel 4 clicks. This means that each leg
section becomes loosen.
Extend legs till the end and twist them towards lock
direction firmly. When closing legs, do this procedure in
reverse order.
In order to adjust length of leg, hold Adjustment grip of
second leg and unlock by rotating it anti-clockwise. Then
extend leg and find desired length.
Then lock it by rotating leg by clockwise firmly.
While closing leg slowly whose position is
low-position(shown as above picture), Leg angle selector
slides towards left automatically making a click sound.
This position is semi low-position.
Lower part of Elevator which is divided is called Lower
column.
Remove Center end by turning anti-clockwise and screw it
into the part devided. This prevents dirt and so on.
Do not lose removed Lower column.
If closing leg further, Leg angle selector slides automati-
cally making a click sound. This makes standard position.
※
※ ※
※
Lock
Lock
Unlock
Unlock
Extending along with
the groove till the end
Closing
Closing
Screw in
Center End
When changing panhead, tighten all the stoppers such as
Panning handle, Side tilting handle, Panning stopper and
Elevator stopper firmly.
Then turn the whole panhead anti-clockwise and detach it
from tripod. Other panheads such as ball socket head can
be set up.
Loosening Elevator stopper enables Elevator to go up and
down. When the desired position is found, tighten Elevator
stopper.
While operating Elevator, make sure to hold your
camera securely.
While closing legs, slide Leg angle selector towards right
completely until you hear click sound.
Then opening legs fully realizes low-position. While
Elevator stopper is tightened, turn lower part of Elevator
anti-clockwise.
Then Elevator is divided in two parts.
When Leg angle selector is slid by mistake, push
down cancel-buttun. Leg angle selector returns to
original position.
Click!
Click!
Tripod screw socket=UNIC1/4
Elevator stopper
(Tighten firmly)
Elevator stopper
Cancel-button
Leg angle selector
Split
Open the leg
Leg angle selector returns
towards left automatically
making sound of clicks.
Leg angle selector moves
towards left automatically
making a click sound.
When holding Rubber foot, do not soil
your hands. Do not pinch your fingers
and hands between Rubber foot and
legs.
When setting up your equipments on
tripod, make sure that strength of
leg-locking is good enough by
suppressing from top of the tripod.
Adjustment
Rubber foot
1.How to change panhead 2.How to use Elevator 3-1.How to adjust leg angle
3-2.How to adjust leg angle 3-3.How to adjust leg angle 4.Lower column
5.How to extend leg and lock How to adjust length of leg
Lower column
Remove
Back and forth
Operating Manual
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velbon ULTRA 555 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velbon ULTRA 555 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info