1-2.How to attach the Camera1-3.How to attach the Camera
Turn to Anti-clockwise direction to unlock.
While raising up the Knob for releasing the Shoe
Sliding out the Quick Shoe
Loosen the Tilting Stopper, and allow you to move the
Camera Up and Down. Loosing the Panning Stopper,
and allow you to move the Camera horizontal. Lock the
stoppers when the angle has been determined.
By unlocking the Panning Handle Locking Lever, the Handle
can be pulled out then install from the opposite side for
changing the angle of the Handle. There are 4 positioning
choices on this handle.
Since the factory assembled, 1/4 inch Screw is installed.
If changing to the 3/8 inch screw, please detach the MF
Screw by the Screw driver. Locking is slightly tighten with
the glue at the beginning.
Use Screw Driver supplied in the package to lock Quick
Shoe to the bottom of the Camera. Video Boss should go
into the hole of Video Boss of the Camera. Video Boss is
retractable. So Cameras without hole of Video Boss can
accept this Quick Shoe.
Sliding into the Head
Locking by turning to the clockwise direction.
Make sure the Head is firmly fixed on the
Tripod before moving the Head.
Keep out from Locking the Panning Handle Locking
Lever tighten while detaching the Handle from the
Head. It may cause damage of the locking system
inside the Head.
Video Boss
Tilting Stopper
(Up-Down)
Panning Stopper
(Horizontal)
Handle
Locking Lever
Detach and
re-install
from the
opposite.
The Screw driver which is
included in the package,
can be used for either
3/8 inch or 1/4 inch as below.
MF Screw
Reverse of the Head.
Individual Part Name
Thank you very much for choosing Velbon photographic accessory. Before using, please read operating manual carefully.
Locking Knob for
the Quick Shoe
Knob for releasing
the Shoe
Panning Handle
Locking Lever
*Specifications are subject to change without notice
Camera Screw
Video boss
Quick Shoe (QB-F51)
Tilting Stopper
Panning Stopper
Panning Handle
MF Screw
(1/4 inch or 3/8 inch)
Ideal loads: Velbon mentions physically ideal weight in use.Tripod legs and heads remain actually even better capability to support heavier equipments on the top.
Maximum capability of leads may change depending on the condition and on the shape of the objects. References are mentioned just under the normal condition without strong
wind, not to put too long conversion lens etc.
Specifications
Camera Plate size
Height
Diameter of Pedestal
Weight
Ideal loads to support
Screw size to connect tripod
Quick-Release Plate
Movable distance of the sliding Camera Screw
Suitable Temperature
78mm(3.07in.)
38mm(1.50in.)
488g(1.08ibs.)
1,500g(3.31lbs.)
UNC1/4
UNC1/4 , UNC3/8
96mm(3.78in.)
46mm(1.81in.)
635g(1.96lbs.)
2,500g(5.51lbs)
106mm(4.17in.)
56mm(2.20in.)
890g(1.96lbs.)
3,500g(7.72lbs)
115mm(4.53in.)
66mm(2.60in.)
1,125g(2.48lbs.)
4,500g(9.92lbs)
FHD-41QNFHD-51QNFHD-61QNFHD-71QN
73mm×45mm(2.87inch×1.77inch)
QB-F51
40mm(1.57in.)
Need help? Post your question in this forum.
Report abuse
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Velbon FHD-51QN at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Velbon FHD-51QN in the language / languages: English as an attachment in your email.
The manual is 1,59 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
