578352
32
Zoom out
Zoom in
Previous page
1/36
Next page
10. Die STOPPUHR
10.1 Stoppuhr (Automatik)
Wenn der HC 12.6 eingeschaltet ist (kein SLEEP-MODUS), ist auch der Empfänger für die Pulssignale aktiv. Wenn vom Sender im Puls-Brustgurt dann
Funksignale mit den Pulswerten gesendet werden, startet die STOPPUHR automatisch.
Die STOPPUHR kann auch manuell gestoppt und wieder gestartet werden. Siehe Manuelle Bedienung der Stoppuhr.
Wird die STOPPUHR nicht manuell gestoppt, stoppt sie automatisch, wenn der Empfänger keine Puls-Signale mehr vom Sender im Brustgurt empfängt, d.h.
wenn Sie also den Brustgurt nach dem Training abgelegt haben und/oder die Entfernung zwischen Empfänger und Sender im Brustgurt zu groß geworden ist.
Nur bei laufender STOPPUHR können die Werte für die Informationen ZEIT UEBER--ZEIT IN--ZEIT UNTER und der DSCHN PULS ermittelt werden.
10.2 Manuelle Bedienung der STOPPUHR
Wenn der Computer eingeschaltet ist und der Sender im Brustgurt Puls-Signale sendet (aktueller Puls wird angezeigt), kann die STOPPUHR auch manuell
bedient werden.
Schritt 1: Holen Sie mit der PULS Taste die Information STOPPUHR in die Anzeige
Schritt 2: Zum Stoppen /zum Starten der STOPPUHR drücken Sie die beiden Tasten MODE1 plus MODE2 gleichzeitig.
Wenn Sie die STOPPUHR angehalten haben, sehen Sie in der unteren Anzeige "STOPPUHR",und im Wechsel den aktuellen Wert und "FREEZ".
Die Anzeige "FREEZ" zeigt Ihnen, dass Sie die STOPPUHR von Hand angehalten haben. Wenn Sie die STOPPUHR wieder starten
(MODE1 und MODE2 gleichzeitig), sehen Sie in der Anzeige "STOPPUHR" und den aktuellen Wert. "FREEZ" verschwindet aus der Anzeige.
P19
11. Abrufen Durchschnittspuls
Die Information DSCHN PULS wird mit der Taste PULS abgerufen. Der Durchschnittspuls wird aus der Anzahl der Pulsschläge und der STOPPUHR-Zeit
errechnet. Wenn die STOPPUHR manuell gestoppt wurde, kann der Durchschnittspuls nur für die bis dahin gemessene Zeit errechnet werden.
Wenn die STOPPUHR manuell gestoppt wurde, sehen Sie in der unteren Anzeige bei der Abfrage der Information DSCHN PULS den aktuellen Wert im
Wechsel mit "FREEZ". An "FREEZ" erkennen Sie, das die Stoppuhr manuell angehalten wurde.
D
HC
12.6
32
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO HC 12.6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO HC 12.6 in the language / languages: German as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info