98458
14
Zoom out
Zoom in
Previous page
1/18
Next page
17
Traffic Announcements (TA)
You can activate the TA mode to give priority to
hear announcements related to these subjects
(even if you do not listen to the radio).
This function is only available with RDS on.
Activate/deactivate TA
Press TA button to activate/deactivate TA. When
traffic announcement is selected and information
is received TP appears in the display.
Interrupting Traffic Announcement
If you do not wish to continue listening to a par-
ticular Traffic Announcement mode, you can
interrupt it without switching off the mode.
1. Press TA button once, the set will return to
the previous operating mode.
Note: You can switch off RDS features if not
required.
2. Press the AF/REG button and select the
option OFF.
Advanced RDS Settings
Long press the SEL MENU knob to enter the
advanced RDS settings menu.
TA SEEK or TA ALARM mode
Note: TA must be activated.
TA SEEK mode
If in a newly tuned radio station does not trans-
mit traffic information within 5 seconds, the radio
automatically seeks for a new station that trans-
mits traffic information. In the TA seek mode the
current station can be switched to another sta-
tion if the signal is too weak because the car
radio is searching for TP-stations that have
strong broadcast signals and are transmitting
TP-signal information.
1. Long press the SEL MENU knob.
2. Turn the VOL knob to select the TA SEEK
mode.
TA ALARM mode
When TP information gets lost at the current
station NO TP TA will flash in the display. To
select the TA ALARM mode:
1. Long press the SEL MENU knob.
2. Turn the VOL knob to select the TA ALARM
mode.
MASK DPI or MASK ALL mode
MASK DPI
In the MASK DPI mode, radio on alternative
frequencies (AF) that have different programme
identifiers (PI) will be masked.
1. Long press the SEL MENU knob to select
the MASK settings.
2. Turn the VOL knob to select MASK DPI.
MASK ALL
In the MASK ALL mode, radio stations on alter-
native radio frequencies with different pro-
gramme identifiers (PI) and/or without RDS de-
tected will be masked.
1. Long press the SEL MENU knob to select
the MASK settings.
2. Turn the VOL knob to select MASK ALL.
PI SOUND or PI MUTE mode
PI SOUND
Note: This function is available with AF activated
only.
In some countries, it is possible of having two
different stations with the same frequencies but
different PI. If this mode is selected, the radio will
switch to the new PI station for a few seconds
and switch back to the current station. To select
the PI SOUND mode:
1. Long press the SEL MENU knob.
2. Turn the VOL knob to select the PI SOUND
mode.
PI MUTE
In this mode the radio will be muted, when a new
radio station is received.
1. Long press the SEL MENU knob.
2. Turn the VOL knob to select the PI MUTE
mode.
RETUNE S or RETUNE L mode
When the signal of the current station becomes
to weak, with these modes the time can be set
how long the radio waits, to seek for an alterna-
tive broadcast station.
RETUNE S
In this mode the waiting time is set to 30 sec-
onds.
1. Long press the SEL MENU knob.
2. Turn the VOL knob to select the RETUNE S
mode.
RETUNE L
In this mode the waiting time is set to 90 sec-
onds.
1. Long press the SEL MENU knob.
2. Turn the VOL knob to select the RETUNE L
mode.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO Dayton CD1107 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO Dayton CD1107 in the language / languages: English as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of VDO Dayton CD1107

VDO Dayton CD1107 User Manual - German - 19 pages

VDO Dayton CD1107 User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info