165783
2
Zoom out
Zoom in
Previous page
1/22
Next page
GB
3
CONNECTOR A (fig. 2)
POWER SUPPLY CONNECTIONS
Brown wire A8: Connect to an earthing point on the car body.
Red wire A7: Connect to a permanent 12 V supply. This is the main power supply.
Ensure this connection can handle a current of 10 A.
Yellow/red wire A4: Connect to the switched 12 V supply of the car ignition.
This connection set up will enable you to make full use of the ON/OFF LOGIC function of this
set limiting the use of the set to 1 hour after removal of the ignition key. If this feature does
not appear to be functioning as expected you may require an adapter cable. See reverse of
installation card.
OPTIONAL CONNECTIONS FOR CONNECTOR A
ELECTRONIC / MOTOR AERIAL
Connect the supply for an electronic aerial or the control wire for the relay of an automatic
motor aerial to pin A5. Use the small contact supplied.
Do not use this connection point for direct supply of the aerial motor!
PILOT LIGHT
When the car headlights are switched on, the backlight to the power key remains illuminated
(even when the radio is switched off). With this connection when the set is on, the brightness
of the display is reduced.
Connect pin A6 to the dashboard illumination wiring of your car.
Use the small contact supplied.
CONNECTOR B for loudspeakers 4 x
l
(fig. 3)
- Only use loudspeakers that have an impedance of 4 ohms.
- Do not connect any of the loudspeaker wire to earth!
- Do not connect a booster/amplifier directly to the loudspeaker outputs!
- Do not connect loudspeakers via an external fader!
Blue wire B1: Connect to Rear Right speaker (+).
Blue/black wire B2: Connect to Rear Right speaker (–).
Grey wire B3: Connect to Front Right speaker (+).
Grey/black wire B4: Connect to Front Right speaker (–).
Green wire B5: Connect to Front Left speaker (+).
Green/black wire B6: Connect to Front Left speaker (–).
White wire B7: Connect to Rear Left speaker (+).
White/black wire B8: Connect to Rear Left speaker (–).
To check the loudspeaker connections keep the SOUND key pressed and switch on the set.
To cancel switch off the set.
RC719/819 GB 24/02/00 15:06 Page 3
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO Dayton cd 3100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO Dayton cd 3100 in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info