7264

VDO Dayton CD 2203 Manual

13
Zoom out
Zoom in
Previous page
1/16
Next page
13
* Depending on version
DISC EJECT (CD PLAYER) (See page 3, figure
E)
• Flip down the front and press EJECT to remove
the CD from the player.
SWITCHING THE DISPLAY MODE (CD)
• Press once or repeatedly to switch the
display between track number/elapsed play
time, total track time, background station name
or frequency and sound style.
SWITCHING THE DISPLAY MODE (CD CHANGER)
• Press once or repeatedly to switch the
display between track number/elapsed play
time, disc number/total track time, background
station name or frequency and sound style.
SPECIAL FUNCTIONS
Setting the clock (manually)
• See 'SAM' (page 14), option 'CLOCKSET' .
Note :
You can select 12 hour or 24 hour clock display.
• See 'SAM' (page 14), option 'CLOCK' .
RDS clock (auto update)
You can select an automatic update of the clock
via the RDS radio signal.
• See 'SAM' (page 14), option 'CLOCK' .
– The transmitted time via RDS can be incorrect.
SDVC (Speed Dependent Volume Control)*
See 'INSTALLATION' (page 5) for connection
instructions.
To compensate for surrounding noise, this function
automatically increases the volume of the set with
respect to the car's speed. Four compensation
levels can be selected. Level 1 gives a small
increase while level 4 gives a greater increase.
See 'SAM' (page 14) option 'SDVC' to select the
level until you find one which suits your car.
To calibrate :
To avoid unnecessary distraction we advise
that this procedure is carried out with the help
of somebody else.
1 While stationary, hold down the ‘SAM’ key and
a short press on the ‘PWR’ key to switch on
the set.
2 The set mutes.
Display shows 'RECALIB' and
'50KM/H' (30 MPH) alternately.
3 Now drive to 50KM/H (30 MPH).
Always obey the highway code and current
traffic restrictions and conditions!)
4 Once 50KM/H (30 MPH) is reached, press
or key.
You hear a beep and display shows 'CALIB OK'.
5 Now turn the set off and then on again to return
to normal operation. Level 2 is chosen for SDVC
in 'SAM'.
004-16 Mid_Eng 11/26/02, 9:09 AM13
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO Dayton CD 2203 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO Dayton CD 2203 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info