34268

VDO C10+ Manual

18
Zoom out
Zoom in
Previous page
1/20
Next page
GB
C
10
WL
16
17. Resetting information to zero
The following information may be reset to zero with your VDO CYTEC C 10 WL.
TRP-RID-AVS-MAX These information here is simultaneously reset to zero.
TCNT This information is singly reset to zero.
STP This information is singly reset to zero.
Information must be reset to zero by pressing the MODE 2 button for 5 sec.
Watch out: Take care that the exact information to be reset is on display.
If either of the following information, TRP, RID, AVS or MAX are displayed and you want to reset to zero by pressing
the MODE 2 button, be aware that the remaining three information are simultaneously zeroed.
18. Stand-by-mode
Your computer VDO CYTEC C 10 WL features a stand-by-mode in order to save battery power.
Your computer changes into stand-by-mode if it has not received any speed impulses for 5 min or no button has been
pressed in the same period of time.
The time of day (CLK) is still displayed in stand-by-mode, though.
By pressing any button or just continuing your ride, this will end stand-by-mode and return you to the appropriate mode.
19. Battery change
Tip:
Take down your totals and wheelsizes prior to battery change.
1. Changing the battery in the computer head see 5.
In case the computer is not properly functioning after a battery change, push the AC-button (Auto Clear) on the
rear side of the computer to reset.
… 18


Need help? Post your question in this forum.

Forumrules
1

Forum

vdo-c10

Reset search

  • unit new batteries fitted (right way up) and sender unit tested by rubbing with magnet of c10+ computer. no signal received by computer which is showing details on head unit. anyone got any suggestions on a fix? Submitted on 30-1-2021 at 17:10

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO C10+ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO C10+ in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info