561354
32
Zoom out
Zoom in
Previous page
1/36
Next page
If you're having problems
If you are having problems with your TV, carry out the following checks first.
If you are still having problems, unplug your TV and contact the service centre.
There is no sound and no picture coming from my TV.
-Check that you have connected the TV power cord properly and switched the wall socket on.
-Check that the power switch at the rear of the TV is set to " ON" .
-Check that you have turned on the POWER button on your TV.
-Check the picture contrast and brightness setting.
There is a normal picture but no sound coming from my TV.
-Check that your TV is not muted or has the volume down.
-Switch the channel, the problem may be with the channel you're on, not the TV.
-Check that your audio cable input has been plugged in properly. If you are using an
external a mplifier .
The remote control does not work.
-Check to see if there is any object between your TV (such as a piece of furniture) that
could block the remote control from connecting with the sensor on your TV.
-Have you put the batteries into the remote control the right way? ( So + to + and - to -)
-Correct remote operating mode was set (such as TV or VCR).
-The TV is not positioned in bright sunlight.
-Try fitting new batteries if none of the above work.
The TV has turned off suddenly.
-Check that you have not set the sleep timer.
-Check that you have not set the timer to control the socket which has your TV power
cord on.
-Check that you have not set auto standby with the broadcast signal source which is
connected to your TV.
The picture on my TV appears slowly after I have switched it on.
This is normal. The image takes a few seconds to appear after you have switched the
TV on. Please contact your service centre if picture has not appeared after five minutes.
There is no or poor quality colour or a poor picture on my TV.
-Change the colour setting on the PICTURE MENU.
-Keep a distance between your TV and any VCR you may be using
-Try watching another channel. The problem may be with the channel you're watching.
-Are the video cables installed properly?
-Change the setting of picture brightness on PICTURE MENU.
There are horizontal and vertical bars on the screen, the picture is shaking.
-Check if any signal interference activities is going on nearby, such as an electrical
appliance or power tool is in operation.
The reception is poor on some channels.
-The TV channel you're watching may be having problems. Change to another channel
and see if the same is happening.
-TV broadcasting signal is weak or has been interrupted.
-Check whether signal sources have any possible interference.
There are lines or streaks on the pictures.
-Check if there is any damage to the aerial on the roof, try to change the direction of the
aerial to receive a better signal.
One of the TV's speakers does not work.
-Check the sound balance setting on SOUND MENU.
Problems and how to fix them
30
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vd tech TQT2210VD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vd tech TQT2210VD in the language / languages: English as an attachment in your email.

The manual is 4,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info