541440
4
Zoom out
Zoom in
Previous page
1/12
Next page
www.vax.co.uk
4
assembly / operation
3. How to Assemble
IMPORTANT: Never unscrew the tank cap
during use.
IMPORTANT: Never fill the tank directly from
a tap. Use a jug and the funnel provided.
IMPORTANT: Do not operate a damaged
appliance or damaged accessories.
IMPORTANT: This steam cleaner is not intended
for commercial use.
NOTE: Carpets should be dry vacuumed thoroughly
before using the steam cleaner.
NOTE: If the supply cord is damaged, it must be
replaced by the manufacturer, a Vax Service Agent or
similarly qualified persons to avoid hazard.
Place the steam cleaner in a horizontal position and
remove the water tank cap. Use the funnel provided to
slowly fill the water tank with clean water. Replace the cap
securely (Fig3/1).
Insert the power plug into an electrical outlet. Make sure
the steam cleaner is switched off.
Press the on/off switch located on the handle to switch
the steam cleaner on.
The red heater “ON” light should now be illuminated.
Press the steam switch to the “ON” position.
After approximately 30 seconds the green “Steam Ready”
light should come on.
Turn the Steam regulator control to maximum and point
the steam nozzle towards a cloth or sink for approximately
10-15 seconds, to stabilise the flow and produce a
continuous steam.
Ensure the steam switch is turned off before connecting
the floor head or an
y of the other cleaning accessories.
4. How to Operate
Align the hole in the side of the floor head with the lock
button on the main body of the steam cleaner. Ensure that
the lock button clicks firmly into place (Fig4/1).
Connect the floor cloth to the floor head by using the
towel grips (Fig4/2).
Turn the steam switch on.
Carpet Cleaning
When cleaning carpets and rugs, leave the steam regulator
control set to “maximum”. Use slow backward strokes and
lift the floor head slightly during forward strokes to reduce
friction between the cloth and the carpet.
N.B Do not press the appliance hard against the carpet.
For large carpeted areas
(Model: V-083Q only)
For freer movement of the steamer over larger carpeted
areas the carpet glide attachment can be used.
De
tach and r
emo
v
e the s
team comb section from the
carpet glide attachment.
Fold the cloth and place inside the carpet glide base.
!
!
!
!
Fig.3/1
Fig.4/1
Fig.4/2
Vax V-083(Q) User Guide.qxd 25/1/07 11:11 Page 4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VAX V-083Q at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VAX V-083Q in the language / languages: English as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info