540963

VAX Performance -VZL-702 Manual

6
Zoom out
Zoom in
Previous page
1/12
Next page
www.vax.co.uk
6
dirt container and filters / clearing blockages
C
leaning the pre-motor filter
NOTE:
This is located underneath the dirt container bin.
1. Release the pre-motor filter cover by pulling on the
tab.
2. Lift out the filter unit and separate the filter and
c
ase.
3. The pre-motor filter can be rinsed in warm water
(max 40°C). Allow to air dry for 24 hours before
replacing.
NOTE: Do not use any detergents or boiling water to
wash the filter. Vax recommends this filter should be
checked and cleaned periodically.
4. Return the pre-motor filter and case to the vacuum
cleaner and replace the pre-motor filter cover before
restarting the vacuum cleaner.
Cleaning the Post-motor filter
NOTE:
This is located on the rear of the vacuum cleaner.
1. Release the post-motor filter cover by lifting the tab
and remove the filter by pressing in the two catches.
2. The post-motor filter can be rinsed in warm water
(max 40°C). Allow to air dry for 24 hours before
replacing.
NOTE: Do not use any detergents or boiling water to
wash the filters. Vax recommends washing the filter.
Vax recommends washing the filter every 9-12 months.
3. Replace the post-motor filter and cover before
restarting the vacuum cleaner.
7. Cleaning Blockages
WARNING: To reduce the risk of electric shock, the
power cord must be disconnected before
performing maintenance/troubleshooting checks.
1. Turn the vacuum cleaner off and unplug from the
electrical outlet.
2. The flexible hose can be disconnected from the
vacuum cleaner by turning the hose to the left and
pulling away from the machine. Remove any
blockages found then reconnect the hose securely.
Clearing debris from the TurboTool (
Model: VZL-704 only)
Switch the vacuum cleaner off and disconnect the power
plug from the electrical outlet.
Rotate the locking ring 180º (Fig.7/1).
Lift the top cover off and remove any blockage (Fig.7/2).
To re-assemble, ensure that the tabs are engage. Pivot the
lower housing closed and rotate the locking ring 180º
(Fig.7/2).
R
emoving debris from the TurboBrush
(VZL
-704 only)
The brushbar will stop rotating if it is blocked during
operation by vacuuming up foreign objects, or is strands of
carpet are wrapped around it.
!
!
!
!
LOCKING RING
Fig.7/1
Fig.7/2
TABS
Vax VZL-702&704 User Guide v5.qxd 27/9/07 15:47 Page 6
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VAX Performance -VZL-702 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VAX Performance -VZL-702 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info